Manual Midland BT City 2013 (page 10 of 16) (English)

543239

Zoom out

Zoom in

1/16

Intercom

The Intercom feature can be enabled in two ways:

Manual activation:

› Press “Control” button, on one of the two units. Communication is

enabled and remains active until you press the “Control” button

again. You will hear 1 audio tone when the Intercom feature is

enabled and 2 audio tones when it is disabled.

Voice activation (VOX):

› This is enabled by default. To start an Intercom communication,

simply start talking. The communication will remain active for all

the time you are talking.

› If there is no conversation, the Intercom is automatically closed

after 40 seconds.

Attention: If needed, you can disable the VOX feature simply by pressing

the “Volume -” button for 3 sec. A voice announcement will advise you

when the VOX is disabled. To turn the VOX on again, just press the same

button and a voice announcement will advise you that the VOX is now

active. This setting is remembered also in you turn o the unit.

How to pair the BT City to previous BT line unit

The BTCity is compatible with all the BT line unit from Midland. You

can pair the BTCity to a BT2, BT1, BTX1, BTX2 or BTNext unit and the

max distance of the intercom is dened from the lower possible.

To pair the BTCity to another BT line unit, you must rst enter the

setup mode:

1. Turn o the unit

2. Press and hold down the “Control” button about 7 sec., until the

Red light is on permanently.

3. Now press long (3 sec) the “Control” button, the Blue and Red light

will ash.

4. Follow the procedure on the other unit’s instruction manual (nor-

mally you can use the “Volume +” button on all the previous BT

line units like BT1-BT2).

5. When successfully paired, each unit will have the Blue light on

for one second and than go back to the setup mode (Red light

always on).

If you don’t have more devices to pair, you must exit the setup mode

from both units before you can use them: for BTCity double click on

the “Control” button, the Red light will turn o and the Blue light will

start ashing. For the other devices of BT line, please refer to their

own user manual.

Resetting all paired devices

Sometimes you may nd it necessary to delete all the pairing referen-

ces stored in the BTCity unit (reset operation).

› To perform this operation, rst switch o the BTCity and than keep

pressed the control button. The red led turns on.

› Simultaneously press and hold down the “Volume +” and “Volume

–“ buttons for 3 seconds. The Blue Light will be lit on for 1 sec.

This procedure deletes all the paired Bluetooth devices stored in the

memory and it is therefore possible to start a new “clean” pairing

session.

Using the wired audio input

Your Midland BTCity is also supplied with a wired audio input (labeled

AUX), that can be used to connect an audio source, like an iPod (or

any other MP3 Player) or a PMR446 transceiver for communications

in group or for a coverage increase.

Priority: the wired audio input has the lowest priority when compared

to the other Bluetooth connections (including the Intercom) and will

therefore always be disabled when another Bluetooth communication

is opened.

Using a i-Pod/MP3 Player

Listening to music

To listen to music from the wired input, connect the audio source

using the cable supplied with the BTCity unit. The volume level is au-

tomatically adjusted by the AGC system, which means that you only

need to adjust the volume of your iPod/ MP3 player to a level that will

allow you to listen to music in normal speed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BT City 2013 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland BT City 2013

Midland BT City 2013 User Manual - English - 9 pages

Midland BT City 2013 User Manual - German - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BT City 2013 Manual

Product: