622039
18
Zoom out
Zoom in
Previous page
1/26
Next page
15
English
6.3 Keyboard tones
1) Press MENU to highlight bP (bip).
2) Press p or q to enable or disable the keyboard tones.
3) Press PTTtoconrm.
2When you press one of the keys to disable the keyboard tones
(oF) in step 2, the radio will not issue a beep to conrm the
disabling. The re-enabling of the tones (on) is instead signaled
with a beep.
6.4 Selecting the call tone
BrieypressCALL to startanaudio call.To select oneofthe ve
available tones:
1) Press MENU eight times. CA (CALL) displays on the left along
with the currently set value: oF (disabled) or 1, 2, 3, 4 or 5,
according to the tone in use.
2) Press p or q to select the desired setting. You can listen to the
tone you are setting through the speaker.
3) Press PTT to exit.
2If you select oF (Disabled), the call function shall be disabled.
Thus, the selection of CALL shall produce no effect.
6.5 Scrambler
The scrambler is designed to protect communications.
This feature prevents parties from other networks from hearing and
understanding voice communications.
To enable/disable the scrambler:
1) Press MENU nine times. SC (Scrambler)
2) Press p or q to enable/disable the scrambler.
3) Press PTT.
If the scrambler is enabled, the status LED ashes in green (two
repeatedashesingreen).
2When the scrambler is enabled, it is not possible to clearly receive
communications. Therefore, before enabling it, it is necessary to
make sure that all the radios you wish to communicate with have
enabled this feature, otherwise you will not be able to communicate
with them.
2The scrambler of the transceiver does not fully guarantee the
safety of communications.
6.6 Out of range indicator
If this feature is enabled, the HP450 2A will issue a double beep
when the radio is out of range.
I The radio with which you are communicating must also
enable this feature.
To enable/disable the out of range indicator:
1) Ask the other radio to enable the feature.
2) Press MENU till oU (Out of range) is displayed.
3) Press p or q to enable or disable this feature.
4) Press PTT(orwaitveseconds).
6.7 Cloning (copying data between radios)
The Cloning feature enables to copy all the settings (for example
channels, CTCSS/DCS, call tones, enabled/disabled features) onto
one or more HP450 2A radios.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Alan HP450 2A Rugged at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan HP450 2A Rugged in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland Alan HP450 2A Rugged

Midland Alan HP450 2A Rugged User Manual - German - 29 pages

Midland Alan HP450 2A Rugged User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info