622039
17
Zoom out
Zoom in
Previous page
1/26
Next page
14
English
6 Functions of MENU key
1) Press MENU several times to highlight the desired function.
2) Press p or q to set the selectable value for the displayed
feature.
The following table lists the features that can be set (the number of
times key MENU has to be pressed is indicated in the columns on
the left):
MENU Feature Display Disabled
1 Selection of the operating channel (channel) NO
2 Selection of the CTCSS tones CTC NO
3 Selection of the DCS codes DCS NO
4 Mode VOX YES
5 Dual Watch DW YES
6 Roger bip NO
7 Keyboard tones bP NO
8 Selection of the call tone CA NO
9 Scrambler SC NO
10 Out of range indicator oU YES
11 Cloning (copying data between
radios)
CL NO
6.1 E-VOX
e-VOX (enhanced Voice Operated eXchange) enables to start a
transmission without pressing any keys, but by simply talking. The
sensitivityofe-VOXcanbeadjustedaccordingtoneeds;forexample
depending on whether you use the transceiver only or the optional
microphone or on whether you use the radio in a very noisy or noise-
less environment.
1) Press MENU several times until VOX ashes on the display
(normally 4 times). The right section of the displays shows the
current VOX setting (for example oF if the feature is disabled).
2) Press p or q to highlight the number related to the desired
setting as shown in the following table:
No. Sensitivity Comments
oF - VOX disabled. transmission can be started only
by pressing PTT
1 Minimum In this case you can talk even in a very low voice
and at a greater distance from the radio. However,
if the environment is too noisy, transmission may
be accidentally started by any noise.
2 Medium Intermediate setting
3 Maximum In this case you will have to talk in a loud voice
and close to the radio, but it is also possible to
use the radio in very noisy environments.
3) Press PTTtoconrm.
6.2 Roger bip
“Roger bip” is a short audio tone that the radio issues when you
release PTT at the end of the transmission. To enable/disable roger
bip:
1) Press MENU six times to highlight
.
2) Press p or q to enable or disable it.
3) Press PTTtoconrm.
2If the Roger bip feature has been enabled and the radio is in
standby mode,
displays.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Alan HP450 2A Rugged at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan HP450 2A Rugged in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland Alan HP450 2A Rugged

Midland Alan HP450 2A Rugged User Manual - German - 29 pages

Midland Alan HP450 2A Rugged User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info