738662

Midland Alan HP106 Manual

42
Zoom out
Zoom in
Previous page
1/146
Next page
14 CTCSS/DCS and Selective Call operation
6 CTCSS/DCS and Selective Call operation
6.1 Reception
The radio may be set-up so that, during the operation with the
CTCSS/DCS and/or Selective Call, audio is enabled only when you recei-
ve the appropriate CTCSS/DCS tone and/or Selective Call. Speaker will
then remain muted until the correct CTCSS tone, the correct DCS code
and/or the appropriate selective call is received. As soon as this condi-
tion takes place, the speaker will be unmuted allowing you to hear the
message and the status LED will glow amber. In case of reception of
signals without the correct tone, the speaker will remain muted and the
status LED will glow green.
Depending on the programming, you can temporarily disable the
CTCSS/DCS and the selective call in order to monitor the radio traf-
fic. For details please refer to the paragraph 5.5.
6.2 Transmission
6.2.a CTCSS/DCS transmission
If your transceiver has been programmed to transmit a CTCSS tone or a
DCS code, it is not necessary to do anything. The CTCSS tone or the
DCS code is automatically sent every time you transmit (the device does
not show this condition).
6.2.b Sending a normal selective call
On your transceiver the MON and FUNC buttons could have been pro-
grammed to send, respectively, the selective call Nr.1 and Nr.2.
To send a selective call:
1) Ensure that the channel is not busy (otherwise you will cause an inter-
ference), verifying that the status LED is not glowing green or amber.
If the channel is not free, please wait until that condition takes place
(LED turned-off)
2) Keep the MON or FUNC button pressed until the device will produce
a beep (about 3 seconds), then release the button. The default
address of every button is automatically recalled.
During a call, the transceiver turns automatically on the transmission
(the status LED glows red), so it is not necessary to press the PTT but-
ton.
6.2.c Sending an emergency selective call
If your transceiver has been programmed to send an emergency selecti-
ve call, you can send it by simultaneously pressing for a long time both
the MON and FUNC buttons until you will hear a beep and the status
LED will glow red, then release the buttons. The transceiver will send the
emergency selective call.
Please use the emergency selective call only if a real condition
requires its use. Please agree its use with your radio network
manager.
During a call the transceiver turns automatically on the transmission
(the status LED glows red), so it is not necessary to press the PTT but-
ton
English
ISTR106_int 26-09-2003 9:47 Pagina 14
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Alan HP106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan HP106 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info