738663
38
Zoom out
Zoom in
Previous page
1/146
Next page
10 Basic operations
To remove the belt press the belt clip spring and do the reverse of what
stated to fit the belt clip.
4.5 Charging the battery pack
In order to carry out the first charge of the battery pack please refer to the
User’s Manual supplied with the battery charger. This one is supplied
separately, as it is available in two versions to choose depending on your
needs:
Desktop slow battery charger – more convenient model which
allows you to maximize the life of your battery pack.
Rapid intelligent battery charger – for a quick and automatic bat-
tery charge.
For the next charges, best duty and battery life, please refer to
the paragraph 8.1.
The battery chargers are for indoor use only.
If the battery pack is new, it is not 100% efficient, meaning that it could
get discharged before the expected time. In order to reach the full
capacity, you must carry out the “running-in period” of the battery
pack through at least 3-4 complete charge/discharge cycles, after that
the battery reaches its maximum efficiency. For further details please
refer to the paragraph 8.1.a.
5 Basic operations
This section describes how the standard functions work. The standard
functions could have been modified by your radio network manager. For
such reason the way your transceiver operates can slightly differ from
what is described here.
IMPORTANT: In case of doubts please contact your dealer/radio net-
work manager for further details.
5.1 Switching the radio ON/OFF
To switch the radio on rotate the PWR/VOL knob clockwise beyond the
mechanical “click” until the radio is switched on: the internal CPU will
start an autotest as follows:
The status LED will light green, then red and finally off.
A multi-tone acoustic signal confirms that the autotest has been pas-
sed.
The self-test goes very fast, therefore the LED optical signaling could
not be seen.
To switch the radio off just completely rotate the PWR/VOL knob coun-
terclockwise beyond the mechanical “click” until the radio is switched off.
English
ISTR106_int 26-09-2003 9:47 Pagina 10
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Alan HP 406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan HP 406 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info