Manual Midland Alan 48 Pro (page 12 of 46) (English, German, French, Italian, Polish, Spanish)

738488

Zoom out

Zoom in

1/46

MICROPHONE

1. PTT: transmission button

2. UP/DOWN buttons: manual channel

selector

3. LOCK button: it allows you to lock the

UP/DOWN buttons.

4. 6 pin microphone connector

INSTALLATION

Safety and convenience are the primary consideration for mounting any piece

of mobile equipment. All controls must be readily available to the operator

without interfering with the movements necessary for safe operation of the

vehicle. Set the proper position in the car to install the transceiver using the

supplied supporting bracket or eventually the slide bracket. Tighten the retai-

ning screws. The fixing bracket must be close to metallic parts.

POWER SUPPLY

Be sure the transceiver is off. In the direct-voltage power supply, it is very

important to observe the polarity even if the unit is protected against the

accidental inversion:

Red = positive pole (+)

Black = negative pole (-)

The same colors are present on the battery and in the fuse box of the car.

Correctly connect the cable terminal to the battery.

ATTENTION: To obtain best performances we recommend to install the radio in

a place with enough air circulation.

INSTALLING AN ANTENNA

1. Place the antenna as high as possible.

2. The longer is the antenna, the better will be the performance.

3. If possible, mount the antenna in the center of whatever surface you cho-

ose.

4. Keep antenna cable away from noise sources, such as the ignition switch,

gauges, etc.

5. Make sure you have a solid metal-to-metal ground connection.

6. Prevent cable damage during antenna installation.

WARNING: To avoid damage, never operate your CB radio without connec-

ting a proper antenna. A periodical control of the cable and of the S.W.R. is

recommended.

Il connettore per antenna deve essere maschio o femmina? Submitted on 24-2-2023 at 13:45
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan 48 Pro in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland Alan 48 Pro Manual

Product: