738488

Midland Alan 48 Pro Manual

11
Zoom out
Zoom in
Previous page
1/46
Next page
UK
3
and press M1 for at least 3 sec to store the choosen channel in the M1
memory. Repeat these steps to memorise the other presets.
9. EMG button: Emergency channel. By pressing it, the unit will be
automatically positioned on CH 9 (emergency channel). The display will
show “EMG”. It will not be possibile to accidentally change the channel.
10/11. “Q. UP-Q. DOWN” buttons: To skip 10 channels up (Q. UP) or 10
channels down (Q. DOWN).
12. ’’CB/PA’’ Selector. In the “CB” position, the unit operates as a transceiver.
You can use the PA (public address) function only if you connect a speaker
to the PA jack. In this case the ‘’Volume’’ knob controls the amplification
level.
13. ‘’ANL/OFF’’ Selector. In the ‘’ANL’’ position it activates an automatic
noise limiter for the impulsive noises (caused by the engine of the car or
other sources).
14. “Local/DX” Selector ”Local” position: to receive strong signal only.”DX”
position: to receive weak signals.
15. “AM/FM”(LCR) button: To select AM or FM mode. If you push it along
with the “SCAN” button at the switching on of the radio, it selects the
operating band, which will be displayed. If you select a frequency band
operating in FM mode only, this button enables the LCR function (Last
Channel Recall).
16. “SCAN/NB” button: with this control, you can automatically seek for a
busy channel. Turn the Squelch clockwise until the background noise is
no longer heard.
Press the ‘’SCAN’’ button: the transceiver will scan automatically all the
channels until a carrier is being received. If you push it along with the “AM/
FM” button at the switching on of the radio, it selects the operating band,
which will be displayed. Keep pressed this button to activate the Noise
Blanker filter. To prevent interferences, this filter blocks the signal at every
pulse of high peak energy, such as the car ignition noise for example.
17. DW button: This feature allows you to scan 2 channels of your choice.
When a signal on the second channel is picked up, the conversation on
the first is automatically interrupted and the receiver switches on the
second channel. The monitoring starts again 4 seconds after the carrier
disappears.
To activate this function, operate as follows:
a. Select the desired channel through the channel selector.
b. Press the “DW” button (DW blinks on the display).
c. Select the second channel.
d. Push the “DW” button again: the reading DW will remain fixed.
e. To disable this function, press the “DW” control.
REAR PANEL
18. Antenna connector (SO239 connector type).
19. S. Meter jack: it allows an external “S. Meter” connection.
20. “PA” jack: by connecting with an external loudspeaker, you can use the
unit as an audio-amplifier.
21. ”EXT” jack: external loudspeaker jack (the internal loudspeaker is
excluded).
22. Power 12.6/24V: power supply cable.
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

midland-alan-48-pro

Reset search

  • Il connettore per antenna deve essere maschio o femmina? Submitted on 24-2-2023 at 13:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland Alan 48 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland Alan 48 Pro in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info