Manual Midea 2M-53K (page 27 of 39) (English)

588097

Zoom out

Zoom in

1/39

INSTALLATION INSTRUCTIONS

1. Drill a hole in the wall (suitable just for the

size of the wall conduit), then set on the

fittings such as the wall conduit and its

cover.

2. Bind the connecting pipe and the cables

together tightly with binding tapes. Pass

the bound connecting pipe through the

wall conduct from outside. Be careful of the

pipe allocation to do on damage to the

tubing.

3. Connect the pipes. Refer to "How to

Connect the pipes" for details.

4. Expel the air with a vacuum pump. Refer

to "How to expel the air with a vacuum

pump" for details.

5. open the stop values of the outdoor unit to

make the refrigerant pipe connecting the

indoor unit with the outdoor unit in fluent

flow.

6. Check the leakage. Check all the joints

with the leak detector or soap water.

7. Cover the joints of the connecting pipe

with the soundproof / insulating sheath

(fittings), and bind it well with the tapes to

prevent leakage.

CAUTION

Be sure to with insulating materials cover all

the exposed parts of the flare pipe joints and

refrigerant pipe on the liquid-side and the

gas-side. Ensure that there is no gap between

them. Incomplete insulation may cause water

condensation.

How to take indoor unit apart to connect

the pipes

1. Open the front panel

Slide the two stoppers on the left and right

sides inword until they click. See Fig.50-6.

2. Remove the front panel

Remove the string. (Refer to Fig.50-7).

Allowing the front panel to fall forward will

enable you to remove it.

3. Remove the face plate

Remove the four screws.(Refer to Fig.50-7).

Opening bottom of face plate for a angle

that is 30 degrees, then the top of face

plate will be take up.(Refer to Fig.50-8)

Fig.50-6

Fig.50-7

Fig.50-8

5.5 Connect the drain pipe(Console)

Install the drain pipe of the indoor unit

The outlet has PTI screw bread, Please use

sealing materials and pipe sheath(fitting)

when connecting PVC pipes.

The drain pipe of indoor unit must be heat

insulated, or it will condense dew, as well as the

connections of the indoor unit.

Hard PVC binder must be used for pipe

connection, and make sure there is no leakage.

With the connection part to the indoor unit,

please be noted not to impose pressure on the

side of indoor unit pipes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midea 2M-53K in the language / languages: English as an attachment in your email.

The manual is 10,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midea 2M-53K

Midea 2M-53K User Manual - English - 33 pages

Midea 2M-53K Installation Guide - German - 39 pages

Midea 2M-53K User Manual - German - 33 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midea 2M-53K Manual

Product: