658461

Midas M32 Manual

40
Zoom out
Zoom in
Previous page
1/61
Next page
40 M32 DIGITAL CONSOLE User Manual
There are four standard graphic EQs that provide 31 bands of adjustment
between 20 Hz and 20 kHz. A master volume slider compensates for changes
in volume caused by the EQ. A maximum boost or cut of 15 dB is available for
eachband.
The TruEQ incorporates a special algorithm that compensates for the gain
adjustment overlapping eect that adjacent frequency bands have on one
another. On a standard EQ, when neighbouring bands are boosted together,
theresulting eect is magnied beyond what is visible from the positioning of
the sliders.
This compensated EQ will produce an adjustment that is identical to the actual
positioning of the sliders.
Graphic EQ without frequency response correction.
Graphic EQ with frequency response correction.
Dual DeEsser / Stereo DeEsser
De-essing is an audio eect designed to reduce the amount of excessive sibilance
in an audio signal, usually when dealing with the human voice. The Dual DeEsser
accurately and seamlessly removes sibilance from audio tracks.
The Lo-Band and Hi-Band controls select which portion of the audio spectrum
is aected by the DeEsser on each channel. By increasing the amount of
reduction, the level to which the de-essing aects the input signal can be
controlled. By pressing the rst and third push encoders, the eect can be
targeted specically at male or female voices.
With the Stereo DeEsser, toggle between Stereo and M/S modes by pressing the
fth push encoder.
Stereo Xtec EQ1 / Dual Xtec EQ1
Virtually indescribable, recording engineers claim the Pultec EQP-1a to be the
“secret sauce” of sound enhancement. We analysed this classic to the core and
created an exact physical model that reproduces the multi-faceted sound in
painstaking detail. Even the transformers and tube output stage have been
faithfully modelled. Inspired by Pultec EQP-1a.
LO FREQ determines the curve on which the left hand LO BOOST and LO ATT
controls are eective. These controls can be used to either boost or attenuate the
signal as required. HI FREQ, HI BOOST and HI ATT perform the same function,
but for the higher frequencies. HI BANDWIDTH adjusts the width of the high-
frequency boost curves.
Stereo Xtec EQ5 / Dual Xtec EQ5
Pultec simply wrote the book on passive equalisation. By digitally “rebuilding”
every aspect of the original Pultec classic, we captured the very essence in our
parametric equaliser XTEC EQ5. Our digital re-incarnation is based on the original
model and authentically emulates the smooth character of the its rather unique
components. Inspired by Pultec MEQ5.
LO FREQ, MID FREQ and HI FREQ all dictate at which frequencies the LO BOOST,
MID CUT and HI BOOST push encoders work.
For all of the Xtec EQs, the TRANSFORMER function can be engaged to switch
the Transformer emulation on or o, giving a warmer sound. GAIN determines
how much of the source signal passes through the eect, and ACTIVE toggles the
EQ in or out of the signal path.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas M32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas M32 in the language / languages: English as an attachment in your email.

The manual is 9,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info