658486
25
Zoom out
Zoom in
Previous page
1/70
Next page
9
DL471 DSP
Operator Manual
Chapter 5: Programming Mode
This chapter describes the programming mode, which lets you set up your DL471 DSP.
About the programming mode
In programming mode the four programming buttons in the control panel navigate and
select options from four menus. These menus (see “Menus” on page 13) are used for
setting up the unit ID, checking the internal temperature of the unit and changing the
brightness and contrast of the LCD screen and LEDs, and changing the contrast of the
LCD screen.
Menu navigation
The menu flowchart (see “Menu flowchart (menus 1 to 4)” on page 10) gives an
overview of all the menus and their options, and shows you how to navigate your way
around them.
In the diagram the menus are shown on the left, and each subsequent lower level is to
the right. Also, non-flashing options are the ones currently selected.
The four programming buttons in the control panel have the following functions.
>> To enter/exit programming mode
To enter programming mode, press the down arrow button. The LCD screen’s default
display (see display A on page 10) will change to menu 1.
To exit programming mode from any menu display screen, press MENU repeatedly
until you reach the default screen. The DL471 DSP will exit programming mode
automatically after about 15 seconds of inactivity, that is, if none of the programming
buttons are pressed within that time.
>> To select a menu
In programming mode, scroll to the menu you want by using the up/down arrow
buttons. Then, press SELECT.
Navigation buttons Usage
Moves up a menu level. Exits programming mode,
depending on the current menu level.
Moves down a menu level or selects the current
option.
Scrolls through the current level of menus/options.
Scrolls through the current level of menus/options in
the opposite direction to the up arrow button. Enters
programming mode if you are at the default display in
normal operating mode.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL471 DSP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL471 DSP in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info