658489
36
Zoom out
Zoom in
Previous page
1/58
Next page
20
DL371 Audio System Engine
Operator Manual
>> To fit a module
1 Make sure that the unit is switched off and electrically isolated (see “To remove
power from (electrically isolate) the unit” on page 16).
2 At the rear of the unit, offer up the rear of the module to its required module
position. Make sure that the module is in the correct orientation and that the
bottom eject handle is in the angled down position, as shown in the following
diagram.
3 Insert the module into the empty slot and push it carefully, but firmly, into
position. The bottom eject handle will clip back up into its fully fitted position
(matching the top eject handle) when the module is in place.
4 Secure the module using the two securing screws (see Figure 1 on page 19).
5 Connect up the unit and switch it on (see Chapter 4 “Getting Started”).
6 Check that the new module is functioning correctly (see “DSP modules” on
page 11).
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL371PRO9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL371PRO9 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info