658489
35
Zoom out
Zoom in
Previous page
1/58
Next page
19
DL371 Audio System Engine
Operator Manual
Appendix B: Replacing A Module
Caution:
The module is a static-sensitive device. Proper grounding and
electrostatic discharge (ESD) precautions are required before
handling the module.
The design of the DL371 Audio System Engine makes module replacement very easy
and straightforward. The unit has rack guides in each of the seven module positions so
that the modules can slide easily in and out. Each module is held in place by two
screws.
To replace a module the only tool you will need is a Torx T10 screwdriver.
>> To remove a module
1 Switch off and electrically isolate the unit, as detailed in “To remove power from
(electrically isolate) the unit” on page 16. Then, disconnect all connectors from
the rear panel.
2 On the module you want to take out, remove the two securing screws (top and
bottom), as shown in Figure 1.
Figure 1: Module fixings
3 Disengage the module from the backplane by pressing down firmly on the bottom
eject handle (see Figure 1).
4 Carefully pull out the module by its top and bottom eject handles.
Module securing
screws
Top eject handle (fixed)
Bottom eject handle (lever)
Pressing down firmly
on this eject handle
releases its module
from the backplane
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL371PRO9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL371PRO9 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info