658463
13
Zoom out
Zoom in
Previous page
1/20
Next page
13User Manual
6. Operation
Programming Mode
This chapter describes the programming mode of the DL150 Series Fixed-Format I/O Unit.
Menu navigation
The four programming buttons in the control panel have the following functions.
Navigation buttons Usage
_________________________________________________________________________________
Moves up a menu level. Exits programming mode, depending on the
current menu level.
Moves down a menu level or selects the current option.
Scrolls through the current level of menus/options.
Scrolls through the current level of menus/options in the opposite
direction to the up arrow button.
_________________________________________________________________________________
The menu owchart (see “Menu owchart (options 1 to 4)” on page 15) gives an overview of all the menus and their options,
and shows you how to navigate your way around them. In the diagram the menus are shown on the left, and each subsequent
lower level is to the right. Also, non-ashing options are the ones currently selected.
To enter/exit programming mode
To enter programming mode, press the MENU button and hold down for approximately two seconds; the default display will
change to the “Main menu” display for the rst option (see display A on page 15).
To exit programming mode from any menu display screen, press MENU repeatedly until you reach the default screen. The unit
will exit programming mode automatically after about 20 seconds of inactivity if none of the programming buttons are pressed
within that time.
To select a menu
In programming mode, scroll to the menu you want by using the up/down arrow buttons, then press SELECT.
Menus
The four menus in programming mode are as follows:
1. AES clock — for selecting the method for synchronising the AES50 (see “1 AES clock menu below).
2. Set ID — for setting up the unit’s network ID (see “2 Set ID menu” below).
3. CBMA Version — for viewing the unit’s CBMA version number.
4. Software Vers. — for viewing the unit’s software version number.
In programming mode the four programming buttons in the control panel are used to navigate and select options from a num-
ber of menus (see “Menu owchart on page 15), which let you set up the unit and view information.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL150 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL150 series in the language / languages: English as an attachment in your email.

The manual is 6,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info