658463
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
User Manual
4. Rear Panel
The rear panels of the DL150 Series units are also similar and are described here, with the DL153 being used for illustration
purposes.
9 10 11 13 14
7 8
12
7 I/O Card ‘B’ - 8-channel I/O card position.
8 I/O Card ‘A’ - 8-channel I/O card position.
9 Mains Power Inlet - IEC inlet with integral mains switch.
10 I/O Card ‘C - 8-channel I/O card position.
11 Diagnostics port - 9W ‘D’ connector for diagnostics use. This is not an operator function and is only to be used by
service personnel.
12 Activate Boot Mode - the boot mode switch selects between normal operation and a service personnel-only conguration
boot mode. This is not an operator function and is only to be used by service personnel.
13 Ethernet Control Port - 1 x rugged Neutrik ‘Ethercon’ connector with integral status LEDs.
14 AES50 Ports - 2 x rugged Neutrik ‘Ethercon’ connectors with integral status LEDs.
For the I/O cards above (7, 8 & 10) each of the DL150 Series will have a dierent conguration, as shown below:
DL151
24 female XLR chassis connectors, which provide inputs for mic/line equipment. Each socket has a red LED that illuminates
when +48V phantom power is on for that input.
DL152
24 male XLR chassis connectors, which provide outputs for line equipment. Each socket has a red LED that illuminates
when mute is on for that output.
DL153
16 female XLR chassis connectors, which provide inputs for mic/line equipment. Each socket has a red LED that illuminates
when +48V phantom power is on for that input.
8 male XLR chassis connectors, which provide outputs for line equipment. Each socket has a red LED that illuminates when
mute is on for that output.
DL154
16 male XLR chassis connectors, which provide outputs for line equipment. Each socket has a red LED that illuminates
when mute is on for that output.
8 female XLR chassis connectors, which provide inputs for mic/line equipment. Each socket has a red LED that illuminates
when +48V phantom power is on for that input.
DL155
8 male XLR chassis connectors, which provide outputs for line equipment. Each socket has a red LED that illuminates when
mute is on for that output.
8 female XLR chassis connectors, which provide inputs for mic/line equipment. Each socket has a red LED that illuminates
when +48V phantom power is on for that input.
8 AES3 (AES/EBU) digital inputs and 8 AES3 outputs on XLRF/XLRM.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midas DL150 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midas DL150 series in the language / languages: English as an attachment in your email.

The manual is 6,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info