Manual MicroTouch M29228 Titanium Solo (page 5 of 16) (English, German, Dutch, French, Italian)

813595

Zoom out

Zoom in

1/16

(aufwärts, abwärts oder quer) versuchen und den Scherkopf gegen

die Wuchsrichtung bewegen.

• Für das beste Ergebnis auf vollständig trockener Haut und

Haaren benutzen.

PRÄZISES TRIMMEN OHNE AUFSATZ

• Eine der beiden Kanten der Klinge für scharfe Linien nutzen.

• Halten Sie den MicroTouch Solo Titanium mit der Klinge an die

Haut, so dass nur eine Kante tatsächlich die Haut berührt (Bild 7).

• Mit sanften & leichten Bewegungen den Bart zurechtschneiden.

PFLEGE UND WARTUNG

Reinigung:

Die MicroTouch Solo Titanium Klinge ist zerbrechlich – bitte mit

Sorgfalt handhaben.

• Wenn sich Haare am Aufsatz oder der Klinge angesammelt

haben, vorsichtig mit der mitgelieferten Bürste reinigen.

• Die Klinge nicht spülen. Das kann Schäden verursachen.

Entfernen des Trimmaufsatzes:

• Den Daumen oben auf den Trimmaufsatz legen (Bild 8) und nach

unten drücken, um diesen vom Klingenkopf (Bild 9) zu entfernen.

• Heben Sie den Trimmaufsatz ab (Bild 10).

Anbringen der Trimmaufsatzes

Achten Sie bitte darauf, den gewünschten Aufsatz mittig zu platzieren

und durch leichtes Andrücken auf beiden Breitseiten mit je einem

Klick einrasten zu lassen. (Bild 12)

Tauschen der Klinge:

Für optimale Ergebnisse, die Klinge alle 1-2 Monate oder, sobald

diese nicht mehr die gewünschten Ergebnisse erzielt, ersetzen.

• Alle Zubehörteile entfernen.

• Bei aufgesetzter Abdeckung die Klingenfreigabe vorsichtig nach

oben schieben und die Klinge entfernen (Bild 11).

• Die neue Klinge seitlich halten und auf das Griﬀstück drücken,

bis ein “Klick” zu hören ist.

• Die Abdeckung vor Gebrauch entfernen.

HINWEIS: Darauf achten, dass der Schaft unter dem Klingenkopf

in der Mitte sitzt, bevor diese einrastet. Wenn sich die Klinge nach

dem Austausch nicht bewegt, sobald das Gerät eingeschaltet ist, die

Klinge abnehmen, das Gerät ohne Klinge kurz einschalten und diese

erneut, wie beschrieben, anbringen.

WARNING NOTES

• Only for dry use.

• Do not rinse Only ever clean the blade using

the supplied brush.

• Keep out of the reach of children.

• Do not place in water or other liquids while

the device is being charged.

• Do not submerge into water or other liquid.

• Unplug and remove power cord before

cleaning/using.

• Do not use the trimmer while it is plugged in.

• This unit contains a lithium ion battery.

Dispose of in accordance with all applicable

federal, state and local regulations.

• Do not dispose of in ﬁre.

• Do not use your MicroTouch Solo Titanium on

sensitive or irritated skin.

• Always check the unit before use. Do not use

if damaged, as personal injury may occur.

• This appliance can only be used by

children aged from 8 years and above and

persons with reduced physical, sensory or

mental capabilities or lack of experience

and knowledge if they have been given

supervision or instruction concerning use of

the appliance in a safe way and understand

the hazards involved.

GETTING STARTED

NOTE: Prior to ﬁrst use, test the blade on a small area of your arm

or leg. If hypersensitivity or an allergic reaction occurs, discontinue

use immediately. Use with care around sensitive areas, such as the

ears, to avoid scratches and cuts.

CHARGING

• Ensure that the unit is fully charged before use.

• Plug the small end of the charging cable into the MicroTouch Solo

Titanium and the large end into a USB port (Figure 1) (Adapter not

included). Initial charging and recharging requires approximately

4 hours.

• The power indicator LED will turn RED when charging (Figure 2).

The light will switch oﬀ as soon as the device is fully charged.

• The MicroTouch Solo Titanium has an operating time of

approximately 45 minutes when fully charged.

NOTE: If the performance weakens, recharge the device.

APPLICATION

The MicroTouch Solo Titanium is intended for use on facial hair

including beards, moustaches and sideburns.

• The MicroTouch Solo Titanium is designed for DRY USE ONLY. Do

not use in shower.

• If the blade cover is attached, slide it down before use (Figure 3).

Use the On/Oﬀ switch to turn MicroTouch Solo Titanium ON and

OFF (Figure 4).

NOTE: When the appliance is turned on, the power indicator LED

turns blue. It is recommended that the blade cover be kept on when

the appliance is not in use.

SHAVING

• DO NOT use water and/or shaving foam. This can cause the blade

to stick or to stop working.

• Hold the surface of the blade against your skin

(Figure 5).

• For best results, move the shaver head in the opposite direction

of hair growth. Press lightly while making long strokes.

NOTE: It is normal for the shaving head to become warm during use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MicroTouch M29228 Titanium Solo in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0.97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MicroTouch M29228 Titanium Solo Manual

Product: