Manual Microlife NC 120 (page 6 of 81) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

536867

Zoom out

Zoom in

1/81

8. How to recall 30 readings in Memory Mode

This thermometer can recall the last 30 readings.

 Recall mode AP: Press the START button 3 to enter

Recall mode when power is off. The memory icon «M»

will flash.

 Reading 1 - the last reading AQ: Press and release the

START button 3 to recall the last reading. Display 1

alone with memory icon.

 Reading 30 - readings in succession: Press and

release the START button 3 consecutively to recall the

last 30 readings in succession.

Pressing and releasing the START button 3 after the last

30 readings have been recalled will resume the above

sequence from reading 1.

9. Error Messages



Measured temperature too high

Displays «

when measured temperature is higher than 42.2 °C /

108.0 °F in body mode or 100 °C / 212 °F in object mode.

 Measured temperature too low AS: Displays «L»

when measured temperature is lower than 34.0 °C /

93.2 °F in body mode or 0 °C / 32 °F in object mode.

 Ambient temperature too high BT: Displays «H» in

conjunction with the when ambient temperature is

higher than 40.0 °C / 104.0 °F.

 Ambient temperature too low BK: Display «L» in

conjunction with the when ambient temperature is

lower than 16.0 °C / 60.8 °F in body mode or lower than

5.0 °C / 41.0 °F in object mode.



Error function display

The system has a malfunction.



Blank display

Check if the battery has been loaded

correctly. Also check polarity (<+> and <->) of the battery.

 Flat battery indication BN: If the steady battery icon is

the only symbol shown on the display, the battery should

be replaced immediately.

10.Cleaning and Disinfecting

Use an alcohol swab or cotton tissue moistened with alcohol

(70% Isopropyl) to clean the thermometer casing and the

measuring probe. Ensure that no liquid enters the interior of

the thermometer. Never use abrasive cleaning agents, thin-

ners or benzene for cleaning and never immerse the instru-

ment in water or other cleaning liquids. Take care not to

scratch the surface of the probe lens and the display.

11.Battery Replacement

This instrument is supplied with one lithium battery, type

CR2032. Replace with a new CR2032 battery when the

flashing battery symbol appears on the display BN.

Remove the battery cover by sliding it in the direction

shown. Remove the battery and replace with a new one BO.

Batteries and electronic instruments must be dis-

posed of in accordance with the locally applicable

regulations, not with domestic waste.

12.Guarantee

This instrument is covered by a 2 year guarantee from the

date of purchase. The guarantee is valid only on presenta-

tion of the guarantee card completed by the dealer (see

back) confirming date of purchase or the receipt.

 The guarantee covers the instrument. Batteries and

packaging are not included.

 Opening or altering the instrument invalidates the guar-

antee.

 The guarantee does not cover damage caused by

improper handling, discharged batteries, accidents or

non-compliance with the operating instructions.

Please contact Microlife-service.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Microlife NC 120 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Microlife NC 120 Manual

Product: