536871
4
Zoom out
Zoom in
Previous page
1/78
Next page
4
Never open this device.
Earwax in the ear canal may cause a lower temperature
reading. Therefore it is important to ensure the subject's
ear canal is clean.
This device comprises sensitive components and must
be treated with caution. Observe the storage and oper-
ating conditions described in the «Technical Specifica-
tions» section.
Protect it from:
- extreme temperatures
- impact and dropping
- contamination and dust
- direct sunlight
- heat and cold
If the device is not going to be used for a prolonged
period the battery should be removed.
Ensure that children do not use this device unsupervised;
some parts are small enough to be swallowed.
ƽ
WARNING: Use of this device is not intended as
a substitute for consultation with your physician.
This device is NOT waterproof so do not immerse
in liquids.
3. How this Ear Thermometer measures
Temperature
This thermometer measures infrared energy radiated from
the eardrum and the surrounding tissue. This energy is
collected through the lens and converted to a temperature
value. The measured reading obtained directly from the
eardrum (Tympanic Membrane) ensures the most accurate
ear temperature.
Measurements taken from the surrounding tissue of the ear
canal generate lower readings and may result in misdiag-
nosis of fever.
To avoid an inaccurate measurement
1. Switch on the thermometer by pressing the ON/OFF
button 4.
2. After one beep is heard (and the temperature scale icon
is flashing), straighten the ear canal by gently pulling the
middle of the ear back and up.
3. Place the probe 1 firmly into the ear canal, press the
START button 2 and keep the probe in the ear until the
thermometer beeps to signal the completion of the
measurement.
4. Control Displays and Symbols
All segments displayed 6: Press the ON/OFF button
4 to turn on the unit; all segments will be shown for
2 seconds.
Memory
7
:
The last reading will automatically be shown
on the display for 2 seconds.
Ready for measurement 8: When the unit is ready for
measurement, the «°C» or «°F» icon will keep flashing.
Measurement complete 9: The reading will be shown
on the display 3 with the «°C» or «°F» icon; the unit is
ready for the next measurement, when the «°C» or «°F»
icon is flashing again.
Out-of-ear temperature indication AT: A crossed-ear-
icon will appear on the display 3 if the reading falls
outside the range 32.0 42.2 °C / 89.6 108.0 °F.
Low battery indicator AK: When the unit is turned on,
the battery icon will keep flashing to remind the user to
replace the battery.
5. Directions for Use
1. Press the ON/OFF button
4
. The display
3
is activated
to show all segments for 2 seconds.
2. The last measurement reading will automatically be
shown on the display for 2 seconds with the «
M
» icon
7
.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Microlife IR 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Microlife IR 120 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info