715821

Mia SP2003N Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
Prodomus
14
Place the pulp container into position. Place the pulp container under the juicer lid so that it fits into the cut out
of the motorbase (see picture of list of parts). Push the pulp container into the guidance at the rim of the sieve
holder. Position the pulp container before you close the juicer lid.
Place the transparent lid over the sieve holder. The lid can only be mounted in one correct position.The filling
opening must be centered above the stainless steel sieve. The juicer lid must be placed exactly on the sieve
holder to avoid splashing.
Close the safety bail. It has to be engaged properly - otherwise the appliance will not operate!
Align the food pusher into the guiding of the filling opening. The appliance is now ready for use.
OPERATING THE JUICER
Wash your fruit and vegetables and remove all uneatable parts. Remove any hard and uneatable parts of the
fruit and vegetables before juicing (i.e. stalks, hard paring, stones and seeds).
TIP: Most fruit and vegetables such as apples, carrots and cucumbers will not need to be cut into small pieces, as
they will fit into the extra wide filling opening of the juicer. Extereme hard and uneatable parts should be
removed. When juicing carrots, put the strait end first into the filling opening.
Ensure that the juicer is assembled correctly and the power switch is in the OFF (position ‘0’, see assembling
the juicer). Make sure that the juice container is placed direct under the spout and the pulp container is fixed
correctly under the juicer lid (see assembling the juicer).
Plug the mains plug into the next socket.
Switch the power switch to the ON position (I) to start the motor.
CAUTION: If the motor begins to stall or stick during the operation, immediately switch OFF (position ‘0’) and
unplug the appliance (please refer to trouble shoting guide).
WARNING: Always use the food pusher provided to push the food down. Do never insert your hand or other
objects into the open filling opening and always keep your face away during operation and when the appliance is
connected to the power supply.
With the motor running, remove the food pusher and put the prepared food into the filling opening. Do not
overfill the filling opening. Gently push down the food. To extract the maximum amount of juice, push down the
food slowly without any force.
The juice will flow into the juice container and the pulp will concentrate in the pulp container.
CAUTION: Do not allow the pulp or juice container to overfill because this may cause overflow danger of electric
current. To avoid overflow interrupt the extraction and empty the container before it is completely full. (See
disassembling the juicer). Switch OFF the appliance (position ‘0’) and wait until the motor has stopped completely.
Unplug the appliance and put the container aside.
If you want to start extraction again, replace the pulp container and the juice container under the spout.
After juicing is complete: switch OFF (position ‘0’) and wait until the motor has stopped completely. Always
unplug the appliance after having finished the juicing process.
Always clean all removable parts immediately after juicing is complete. (See cleaning and maintainance). Never let
food residues dry on the unit or the filter basket or other parts of the unit.
CLEANING AND CARE
Caution! Always switch OFF and unplug the appliance and wait for the motor standstill before cleaning or
disassembling. Clean the appliance immediately after each use to avoid tack-drying of food residues.
To avoid any risk of electrical shock do not immerse cord, plug or appliance in water or other liquid.
Do not pour or drip any liquids at the motor base or cord and do never place the motor base or power
cord in an automatic dishwasher.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mia SP2003N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mia SP2003N in the language / languages: English, German, French as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info