715817
11
Zoom out
Zoom in
Previous page
1/43
Next page
Prodomus
11
ON / Off switch with level I and II
Wipe all parts of the appliance with a damp cloth before the first use.
Caution! Take special care that fingers never get in direct contact with the blade - it is
extremely sharp!
Place the piece holder on the back of the sliding feet table.
Caution: Always use the food support to push the
food for- and backward!
Adjust the desired size of slices by turning the adjusting
switch (see picture to the right). The scale on the switch
helps to find the desired size of slices. For thin slices turn
the switch clockwise, for thick slices turn it counter
clockwise.
Position 0 for safety reason covers the blade.
Now plug in.
Put the food to be sliced onto the
slicing feed table and take the transparent piece
holder to hold the food safely.
Now switch the ON/OFF switch into position I.
The food slicer will operate.
If switching into position II (pulse) the ON/OFF switch
must be pressed all the time. When releasing the switch the motor will stop.
Move the slicing feed table by slightly pushing the food holder forward.
Caution! Risk of injury! Always be extremely carefull while cutting food. Take care
not to get in direct contact with the sharp blade!
To switch off put the ON/OFF switch into position 0. For safety reason always unplug
after each use and before cleaning!
Clean the unit after each use because it is in contact with food.
C
C
l
l
e
e
a
a
n
n
i
i
n
n
g
g
a
a
n
n
d
d
m
m
a
a
i
i
n
n
t
t
a
a
i
i
n
n
a
a
n
n
c
c
e
e
Caution danger of electric shock! Before cleaning always switch off the appliance and
unplug. Never immerse the appliance cord and plug into water!
Caution risk of injury! The blades of the appliance are very sharp! Keep this in mind
when cleaning or changing the blades.
Remove piece holder and wash separately. Wash sliding feed table on both sides and the
housing with a soft cloth or sponge and a mild soap or spray cleaner. Rinse and dry. Do not
wash any part of food slicer in dishwasher. Never use steel wool or scouring powder on any
part of food slicer!
Cleaning the blade
Caution: the blade is very sharp - risk of injury! Careful when
taking off and cleaning!
Never open the three small screws. It is not necessary and can
cause damage!
To clean or change the blade it can be taken off by turning the
black screw to release the blade.
Unscrew the big black screw by turning it to open (see picture
to the right Cleaning the blade”).
After cleaning install the blade with the big black screw again.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mia SM2796 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mia SM2796 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info