517330
60
Zoom out
Zoom in
Previous page
1/104
Next page
ķ
60
Secondary reflector, as of 35 mm (35 mm format)
Swivelling ranges and locking positions of main reflector
upwards 15° 30° 45° 60° 75° 9
counter-clockwise 90° 180°
clockwise 90° 180°
Dimensions approx. in mm (w x h x d)
Flash unit 92 x 247 x 102
W
eight:
Flash unit without power sources: approx. 680 g
Table 2: Guide numbers at maximum light output (Pag. 96)
Table 3: Distances in TTL flash mode (Pag. 97)
3. . . 16 Distance range without wide-angle diffuser
2. . . 11 Distance range with wide-angle diffuser
These table does not apply to bounced flash.
Batter
y charger 970
Input: 100 – 240 V (50-60 Hz) 0.6 A
Output: 4,8 – 9,6 V 0,8 A (charging current)
Batter
y pack 45-56
Rated voltage/capacity: 7.2V / 1650 mAh
Included BASIC
Flash unit, camera bracket 32-38, battery holder 45-39, synch cable 45-47,
wide-angle diffuser 45-42, operating instructions
, SCA 300 / 3002 Table
.
Included KIT
Flash unit, camera bracket 32-38, battery pack NiMH 45-56, charger, wide-
angle diffuser 45-42, operating instructions
, SCA 300 / 3002 Table
.
17. Optional extras
Malfunctions and damage caused to the flash unit due to the use of
accessories from other manufacturers are not covered by our guaran-
tee.!
• Adapter of the system SCA 300
For flash operation with system cameras. See separate Operating
Instructions. Connecting cable SCA 300A (Order No. 0000930) or con-
necting cable SCA 3045 are additionally required.
• Adapter of the system SCA 3002
For flash operation with system cameras with digital data transmission of
the SCA functions. Extended functional features compared with the SCA
300 system. The SCA 3045 connecting cable is additionally required.
• Connecting cable SCA 3045 (Order No. 000304500)
Connects the flash unit to adapters of the systems SCA 3002 and SCA
300.
• Battery Holder 45-39 (Order No. 000045394)
For dry cell batteries.
• Filter set 45-32 (Order No. 000045327)
Consists of a set of 4 colour effect filters and 1 clear filter to hold any
coloured foil.
• B 46 charger set (Order No. 000129464)
NiMh battery and charger to convert the 45 CL-4 digital to NiMh battery
operation.
• Mecalux 11 (Order No. 0000011)
Sensor for optical, delay-free remote firing of slave flash units by a
camera-triggered flash. Responds also to infrared light beam. Does not
require batteries.
• Mecalux Holder 60-26 (Order No: 000060264)
To mount the Mecalux 11.
• NiMh battery 45-56 (Order No. 000045569)
for NiMh battery operation of the 45CL-4 digital
708 47 0026-A1 BASIC-KIT 14.10.2008 12:54 Uhr Seite 60
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz Mecablitz 45 CL-4 digital BASIC-KIT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz Mecablitz 45 CL-4 digital BASIC-KIT in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info