517330
59
Zoom out
Zoom in
Previous page
1/104
Next page
ķ
59
14 Troubleshooting
Should, for example, the flash unit not work properly in the individual
modes, then switch off the flash unit for about 10 seconds by its main switch.
Check the camera settings and find out if the SCA adapter or the flash unit’s
foot is correctoy mounted in the camera’s accessory shoe.
Replace the old batteries or rechargeable battery packs by new ones.
The flash unit must operate properly when it is switched on again. Contact
your local dealer should this not be the case.
15 Maintenance and care
Remove any grime and dust with a soft, dry or silicon-treated cloth. Never
use detergents – they may damage plastic parts.
Forming the flash capacitor
The flash capacitor incorporated in the flash unit undergoes a physical chan-
ge when the flash unit is not switched on for prolonged periods. For this rea-
son it is necessary to switch on the flash unit for approx. 10 minutes every
3 months. The batteries must supply sufficient power for flash readiness to be
indicated within 1 minute after the flash unit was switched on.
16 Technical data
Guide numbers at ISO 100/21°:
in the metric system: 45 in the imperial system: 148
Flash modes
TTL, TTL modes with preflash (see Table 1), Auto Mode A, Manual Mode M,
high-speed synchronisation HSS
Manually adjustable auto apertures:
f2.8 – f4 – f5,. – f8 – f11 – f16 at ISO 100 / 21°
Automatic aper
ture setting range
f1.0 to f45 (at ISO 100 / 21°) including in-between values (SCA 3002)
Flash durations:
• approx. 1/125 ... 1/20000 sec.
• in M mode approx. 1/125 sec. with full light output
• with 1/2 light output approx. 1/800 sec.
• with 1/4 light output approx. 1/2000 sec.
• with 1/8 light output approx. 1/3500 sec.
• with 1/16 light output approx. 1/6000 sec.
• with 1/32 light output approx. 1/10000 sec
Coverage of sensor:
approx. 25°
Colour temperature:
approx. 5600 K
Sensitivity
:
ISO 25 to ISO 1000 for manual setting
ISO 6 to ISO 6400 for automatic setting (SCA 3002)
Synchronisation:
Low-voltage IGBT ignition
Number of flashes:
• approx. 200 with NiMh batteries 45-56
• approx. 170 with high-capacity alkaline manganese batteries
• approx. 400 with Power Pack P76
(all at full light output)
Recycling time:
• approx. 4 sec. with high-capacity alkaline manganese batteries
• approx. 4 sec. with NiMh batteries 45-56
• approx. 3 sec. with Power Pack P76
(all at full light output)
Flash coverage
Main reflector, as of 35 mm (35 mm format)
... with wide angle diffuser, as of 28 mm (35 mm format)
708 47 0026-A1 BASIC-KIT 14.10.2008 12:54 Uhr Seite 59
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz Mecablitz 45 CL-4 digital BASIC-KIT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz Mecablitz 45 CL-4 digital BASIC-KIT in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info