517309
47
Zoom out
Zoom in
Previous page
1/78
Next page
For TTL flash mode, the operating mode selector
of the mecablitz must be in TTL position. The LC dis-
play (A) indicates TTL.
The maximum effective range (D) for the selected
aperture and the minimum flash-to-subject distance
(D) are given in the flashgun's LC display.
This distance will not be indicated if the reflector
is tilted. A flash-to-subject distance shorter than
the given minimum distance can result in over-
exposure.
A strip of film must be loaded in the camera if tests
are to be conducted in TTL flash mode.
The effective flash range can only be checked by the
correct-exposure display (READY) if the flash is trig-
gered by the camera and not with the manual relea-
se on the flashgun!
Manual flash mode at full light output
To use the mecablitz at full light output in the
manual mode, the operating mode selector must
be set to M (MANUAL) position. The LC display (A)
indicates M (Manual). A full-power flash will then be
Nel modo TTL il selettore della modalità di funzio-
namento del mecablitz deve trovarsi in posizione
TTL. Sul display LC (A) viene visualizzato il simbolo TTL.
Il campo di utilizzo massimo (D) per l'apertura del
diaframma selezionata e la distanza minima del flash
dal soggetto (D) sono visualizzate nel display del flash.
La distanza non viene visualizzata se il riflettore
è inclinato in senso orizzontale. Se la distanza del
flash dal soggetto è inferiore a quella minima
può verficarsi una sovraesposizioni.
Anche per effettuare dei test nel modo flash TTL, è neces-
sario che sul piano pellicola si trovi una sezione di film.
Per controllare il campo di utilizzo del flash median-
te l’indicazione di corretta esposizione, bisogna
innescare il lampo soltanto con il pulsante di scatto
della fotocamera e non premendo il pulsante „open
flash“ del lampeggiatore.
Modo flash manuale con potenza piena
Per utilizzare il mecablitz a potenza piena nel modo
manuale impostare il selettore in posizione M
(MANUAL). Nel display LC (A) viene visualizzato M
funcionamiento del mecablitz tiene que estar en
la posición TTL. En el display LC (A) se indica TTL!
El alcance máximo (D) para el diafragma elegido y
la distancia mínima de iluminación (D) se pueden
leer en el display del flash.
Con el reflector girado no aparece la indicación
de distancia. Si la distancia mínima de ilumina-
ción es inferior entonces puede haber sobre-
exposiciones.
Para hacer pruebas en el funcionamiento TTL, tiene
que haber una película en la cámara.
Si quiere comprobar el alcance de flash mediante la
indicación de exposición-READY, solo es posible si
dispara la cámara y no con el disparador manual del
flash!
Funcionamiento manual con plena potencia de luz
Para el funcionamiento manual del mecablitz con ple-
na potencia de luz se conecta el conmutador de tipos
de funcionamiento a la posición M (MANUAL). En
el display LC (A) se indica M (MANUELL). En cada
disparo de flash por consiguiente se emite un destel-
47
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 40 AF-4 M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 40 AF-4 M in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info