Manual Mettler-Toledo Tiger II - RN10-CNRS (page 7 of 64) (English, German, Dutch, French, Italian, Portuguese, Spanish)

659294

Zoom out

Zoom in

1/64

METTLER TOLEDO

Tiger II 7

Straight weighing

Place the item to be weighed on the platter.

Enter the unit price (The price to pay will come up in the total price display simultaneously).

Remove the item from the platter, all displays will return to 0.

Backlight function (Option)

Some versions of TIGER II are equipped with a backlight for both the operator display and the customer display.

When the light of the environment is not bright enough to get a clear reading from Tiger II's display, the

backlight can be switched on.

Press and hold the C-key until a longer beep is heard, then two continuous beeps will be heard to indicate the

backlight has been switched on.

Use the same procedure to switch the backlight off or just turn the scale off.

When the scale is not used for 15 seconds, the backlight will automatically switch off; when a weight is placed

on the platter or when a key is depressed, the backlight will switch on again.

Note: Please check the model name to see if the scale has backlight function.

Re-zero function

There are two ways to re-zero the scale, power-up zero and push button zero

☞ Power-up Zero

The scale will automatically capture zero when it is turned on. The power-up zero capture range is ±10% of the

scale capacity. When the scale is turned on with a weight on the platter of more than 10% of the capacity, or

with less weight than -10%, the scale will not capture zero (the weight display will show "-----") and the scale

will not be ready for use. After removing the weight or put the weight on the scale will capture "zero".

☞ Pushbutton Zero

The ZERO key re-zeros the scale over a range of ±2% of the scale capacity. To use this function, the scale must

be in the gross weighing mode (NET cursor must be off) and in a no motion condition. When the weight on the

platter is more then ±2% of the scale capacity the depression of the zero key will not be accepted.

Tare Function

The Tare key subtracts the weight of the wrapping material.

☞ Tare Function

Place the empty container or wrapping material on the platter.

Press the T- key.

Place the item to be weighed in the container or on the wrapping material and then onto the platter.

Enter the unit price.

Remove the weighed item and the container or wrapping material from the platter, the displays will show all 0.

To fix the tare, please refer to key-FIX function.

erations

>0<

>T<

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mettler-Toledo Tiger II - RN10-CNRS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mettler-Toledo Tiger II - RN10-CNRS Manual

Product: