495005

Metronic Liberty - 488200 Manual

11
Zoom out
Zoom in
Previous page
1/20
Next page
10
ADDING CHANNELS
Manual Search: searching for a specific satellite channel
- Press MENU / Installation / TP Scan.
- Go to Satellite and press OK to display the list of satellites.
- Using the 56 keys, select the satellite that emitts the channels you wish to view and press
OK to confirm.
- Go to TP Index, press OK to view the list of the frequencies.
- Using the 56 keys select the frequency of the channel you wish to view (if the desired fre-
quency is not diplayed, it will need to be added to the list, as explained in paragraph C).
- The Symbol Rate and Polarity functions will be automatically modified (in case this does
not happen it is possible to enter the values manually).
- Ensure that the quality and signal intensity levels are superior to 50% (grey bar = no signal:
this means that the frequency or LNB parametres are not correct or that the antenna is not
pointing to the right satellite).
- Go to Scan mode and select FREE using the 34keys.
- Use the 6 key to go to Search and press OK.
- The TP Scan window is displayed along with the Find Channel. The screen goes back to
TP Scan. Press EXIT twice to leave the menu.
Automatic Channel Search: searching for all channels from one satellite
- Press MENU / Installation / Auto scan.
- Go to Satellite and press OK to display the list of satellites.
- Using the 56 , keys select the satellite that emitts the channels you wish to view to start an
automatic search. Press
OK
to confirm.
- Go to Scan mode and select FREE using the 34keys.
- Use the
6 key to go to
Search
and press
OK
.
The Auto Search window is displayed along with the Find Channel. The screen goes back to Auto
Search. Press EXIT twice to leave the menu.
Adding / Cancelling / Modifying a transponder (see index 5)
Modifying a transponder:
- Press MENU / Installation / TP Scan.
- Select the satellite on the first line using the 56keys.
- Go to TP List and select the transponder you wish to modify.
- Change the value: frequency, rate symbol, polarity etc.
- Press EXIT to save the data you have entered.
Cancelling a transponder
- Press MENU / Installation / TP Scan.
- Select the transponder you wish to cancel using the 56 keys and press the ‘2’ key
of your remote.
- Press EXIT to save the data you have entered.
5
A
B
C
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metronic Liberty - 488200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metronic Liberty - 488200 in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info