495005

Metronic Liberty - 488200 Manual

7
Zoom out
Zoom in
Previous page
1/20
Next page
6
INSTALLING A MONOBLOC LNB FOR ASTRA/HOTBIRD
(USING AN ANTENNA LARGER THAN 80CM)
Installing a Monobloc LNB (see index 3)
If the receiver is brand new from the factory and that you have
not tried re-setting it yet, there is nothing to modify in order
to install the Monobloc LNB. Install the LNB as explained on
Fig. 4 and point your antenna towards the HotBird satellite as
explained previsouly.
Programming (in case you have modified the menu or are
not sure of which steps to follow)
You should modify the menu parameters as follows:
- Press MENU/Installation/Antenna Details
- Go to Satellite and select ‘HotBird’ using the 34keys.
- Go to LNB Type and select Universal using the 34keys.
- Ensure that the DiSEqC indicates 1.0.
- Ensure that the Commutation Income indicates ½.
- Go to Satellite and select Astra 19 using the 34keys.
- Go to LNB Type and select Universal using the 34keys.
- Ensure that the DiSEqC indicates 1.0.
- Ensure that the Commutation Income indicates 2/2.
- Press EXIT to leave the menu.
Steps to follow:
- Ensure that you are receiving all pre-programmed channels from HotBird and Astra 19.
- If necessary, gently swivel the antenna in order to receive channels from both satellites.
CAUTION: Some Monobloc LNBs have reverse functions. It might then be useful to choose 2/2
for HotBird and ½ for Astra.
Installing a Connector
If you are installing 2 or more antennas, you should connect the LNB to a connector in order to only
have one cable. Install and orientate each antenna as if it were set up on its own, directly connecting
the LNB of each antenna to ‘LNB IN’ socket of the receiver.
Once the antenna has been installed and orientated correctly, modify the programming of the receiver
by following the same steps as to install an LNB (see Programming paragraph).
CAUTION: This receiver is not compatible with a motor.
10°
A
B
Fig. 4
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metronic Liberty - 488200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metronic Liberty - 488200 in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info