Manual Metrix MX 20 (page 45 of 68) (English, German, French)

598215

Zoom out

Zoom in

1/68

MX 20

· It is best to begin by selecting the highest possible range (10A)

when the order of magnitude of the current to be measured is

unknown.

· Do not connect the multimeter in series with the circuit to be

measured until the last possible moment. Then switch on the circuit

to be measured.

· If the range chosen is too high, first switch off the circuit to be

measured, then change the setting of the rotary switch, and switch

on the circuit again.

· Do not under any circumstances change the range or disconnect

the test leads while measuring: this may give rise to switching

current spikes and overvoltages which can damage the multimeter

or blow the fuses unnecessarily.

· To minimise overheating and to prevent thermal drift, measure-

ments in the high current ranges (5A and 10A) should be limited to

a few tens of seconds.

3.4.7 - MEMORY3.4.7 - MEMORY

3.4.7 - MEMORY

· The DATA HOLD key operates the memory mode for all conven-

tional multimeter functions (voltmeter, ammeter, ohmmeter).

· Pressing the key once freezes the value displayed

· Pressing the key a second time clears the display and allows a

new measurement to be carried out.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 20 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metrix MX 20 Manual

Product: