598215
42
Zoom out
Zoom in
Previous page
1/68
Next page
MX 20
37
3.4.3 - AC VOLTAGE MEASUREMENT3.4.3 - AC VOLTAGE MEASUREMENT
3.4.3 - AC VOLTAGE MEASUREMENT3.4.3 - AC VOLTAGE MEASUREMENT
3.4.3 - AC VOLTAGE MEASUREMENT
· Connect the black lead to the terminal marked COM and the red
lead to the terminal marked VW .
· Set the rotary switch to the AC volts position.
· Apply the test prods to the points across which the voltage is to
be measured and read the result directly from the display. The
display also shows the unit of measurement (mV or V).
· Accuracy, resolution, and input resistance: see detail specifica-
tions.
CAUTION Under no circumstances should a voltage excee-
ding 1000V
DC
or 750V
AC
be applied to the instru-
ment, and, where pulse signals are present (for
example in the line scanning circuits of television
sets), use a type HA0902 filter probe.
· In manual ranging mode, if the display shows «1 » the range
selected is too low. Switch to the next higher range by pressing the
MAN RANGE/AUTO RANGE key (press once for less than 2
seconds.)
3.4.4 RESISTANCE MEASUREMENT AND DIODE CHECKS3.4.4 RESISTANCE MEASUREMENT AND DIODE CHECKS
3.4.4 RESISTANCE MEASUREMENT AND DIODE CHECKS3.4.4 RESISTANCE MEASUREMENT AND DIODE CHECKS
3.4.4 RESISTANCE MEASUREMENT AND DIODE CHECKS
·Measuring resistance, like measuring voltage, can be carried out
in autoranging or manual modes (see use of the MAN RANGE/
AUTO RANGE key).
· Connect the black lead to the terminal marked COM and the red
lead to the terminal marked VW on the multimeter and set the rotary
switch to W .
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrix MX 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 20 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info