Manual Metrix MX 20 (page 39 of 68) (English, German, French)

598215

Zoom out

Zoom in

1/68

MX 20

3.3 - BATTERIES INSTALLATION - FUSE REPLACEMENT3.3 - BATTERIES INSTALLATION - FUSE REPLACEMENT

3.3 - BATTERIES INSTALLATION - FUSE REPLACEMENT

The sealed compartment (sealed from both inside and outside of

the instrument) is located under the removable protective cover.

To access the compartment:

- Unlatch the SECUR’X system by inserting the instrument

support strut in the sides and then remove it. This ensures that the

test leads are disconnected.

- Release the protective cover by inserting the instrument

support strut into the sides of the instrument (at the places marked

by the arrows) and by applying moderate pressure.

See exploded view at the end of the manual

Insert the battery, ensuring correct polarity by matching + and -

signs, and replace the cover making sure that the watertight seal

remains clean (no solid particles, grit or other particulates) and is

positioned correctly. Finally snap the SECUR’X system in place.

3.4 - SWITCHING ON3.4 - SWITCHING ON

3.4 - SWITCHING ON

· Set the rotary switch to the required measurement function. The

instrument is then ready for use.

3.4.1 - AUTOMATIC/MANUAL RANGING3.4.1 - AUTOMATIC/MANUAL RANGING

3.4.1 - AUTOMATIC/MANUAL RANGING

· When used as a voltmeter and ohmmeter, the instrument is in

autoranging mode when first switched on. Manual ranging is not

recommended unless the order of magnitude of the quantity to be

measured has first been determined in autoranging mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 20 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metrix MX 20 Manual

Product: