Manual Metrix MX 20 (page 37 of 68) (English, German, French)

598215

Zoom out

Zoom in

1/68

MX 20

3 - OPERATING INSTRUCTIONS3 - OPERATING INSTRUCTIONS

3 - OPERATING INSTRUCTIONS

3.1 - SAFETY PRECAUTIONS3.1 - SAFETY PRECAUTIONS

3.1 - SAFETY PRECAUTIONS

Use of this multimeter implies respect for the usual safety rules

designed to protect the user against electrical hazards and to

protect the instrument against damage resulting from misuse.

The test leads and mains supply lead must be in good condition and

should be changed if there is any evidence of deterioration

(insulation burnt or split etc.). Only the leads supplied with the

instrument are guaranteed to meet safety standards. If necessary

they should be replaced by identical leads.

The maximum values indicated in these specifications should not

under any circumstances be exceeded.

Before opening up the instrument to replace the battery or fuses,

users must check that the test leads are disconnected from all

electrical current sources. Replacement fuses must be of the

same type and rating as the original fuses (see Specifications,

section 2.3).

CautionCaution

Caution

If the display continues to read zero whenIf the display continues to read zero when

If the display continues to read zero when

measuring a non-zero voltage, check the 10Ameasuring a non-zero voltage, check the 10A

measuring a non-zero voltage, check the 10A

fuse immediately (see section 4).fuse immediately (see section 4).

fuse immediately (see section 4).

If the order of magnitude of the quantity being measured is

unknown, begin with the highest range or select autoranging mode.

Disconnect the test leads from the circuit under test before

changing the measurement function. When measuring currents,

the range should not be changed and the leads should not be

plugged in or unplugged without first switching off the current.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 20 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metrix MX 20 Manual

Product: