776246
74
Zoom out
Zoom in
Previous page
1/79
Next page
MI 3360 OmegaPAT XA
Bijlage E
74
Ophoging:
Een 4-cijferig nummer wordt toegevoegd aan het
Appliance ID and iedere keer opgehoogd na afloop van
dezelfde goedgekeurde Auto Sequence® test in een loop-
test.
Apparaat type
Keuze type appliance/apparaat (Apparaat(L), Apparaat(K),
Lasapparatuur(K), Lasapparatuur(L)
Standaard Apparaat
ID
Ingeven standaard Appliance ID
Apparaat naam
Ingeven apparaatnaam
Opties:
Te wijzigen toestaan om apparaatnaam te wijzigen tijdens lopende
Auto Sequence® test. Menulijst met apparaatnamen en mogelijkheid om
nieuwe apparaatnaam in te geven tijdens de test.
Niet te wijzigen standard apparaatnaam wordt gebruikt.
Apparaatnaam kan niet worden gewijzigd tijdens Auto Sequence® test.
Herkeur periode
Herkeur periode in maanden.
Opties:
Te wijzigen. Toestaan de herkeurperiode aan te passen tijdens een
lopende Auto Sequence® test. Numeriek toetsenbord wordt zichtbaar voor
het ingeven van specifieke herkeur periode.
Niet te wijzigen standard ingegeven herkeurperiode wordt gebruikt.
Herkeurperiode kan niet worden gewijzigd tijdens Auto Sequence® test.
Note
Dit flow commando is alleen actief wanneer de Auto Sequence® test is gestart vanuit het
Auto Sequences® hoofd menu.
12.4.6.10 Inspectie Expert mode
Indien het Inspectie Expert mode flow commando wordt gebruikt, zullen de visuele en functionele
checklisten binnen een Auto Sequence® test voor 1 seconde zichtbaar zijn en automatisch volledig zijn
goedgekeurd aan het einde van de test. Tijdens de automatische testprocedure kan de Inspectie Expert de
procedure stoppen en statussen handmatig bedienen.
Inspectie Expert mode is standard uitgeschakeld.
Deze Inspectie Expert Mode functie mag alleen door zeer ervaren inspecteurs worden toegepast.
Parameters
Status
Aan vrijgeven automatisch aanvinken in visuele en functionele checklisten.
Uit blokkeren automatisch aanvinken in visuele en functionele checklisten.
12.4.6.11 Actie na einde test
Elke meetstap wordt standard afgesloten met een Actie na einde test regel. Dit flow commando
controleert de voortgang van de Auto Sequence® in relatie tot het meetresultaat. Met deze functie
kan een volledig automatisch verloop van de Auto Sequence test worden ingeprogrammeerd.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel MI 3360 - OmegaPAT XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel MI 3360 - OmegaPAT XA in the language / languages: Dutch as an attachment in your email.

The manual is 2.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrel MI 3360 - OmegaPAT XA

Metrel MI 3360 - OmegaPAT XA User Manual - English - 154 pages

Metrel MI 3360 - OmegaPAT XA User Manual - German - 172 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info