776312
62
Zoom out
Zoom in
Previous page
1/74
Next page
MI 3109 EurotestPV Lite Data handling
62
6.6.2 Bluetooth communication
How to configure a Bluetooth link between instrument and PC
For Bluetooth communication with PC a Standard Serial Port over Bluetooth link for
Bluetooth dongle A 1436 must be configured first.
Switch Off and On the instrument.
Be sure that the Bluetooth dongle A1436 is properly initialized. If not the
Bluetooth dongle must be initialized as described in chapter 4.4.9
Communication.
On PC configure a Standard Serial Port to enable communication over Bluetooth
link between instrument and PC. Usually no code for pairing the devices is
needed.
Run the EurolinkPRO program.
The PC and the instrument will automatically recognize each other.
The instrument is prepared to communicate with the PC.
How to configure a Bluetooth link between instrument and Android device
Switch Off and On the instrument.
Be sure that the Bluetooth dongle A 1436 is properly initialized. If not the
Bluetooth dongle must be initialized as described in chapter 4.4.9
Communication.
Some Android applications automatically carry out the setup of a Bluetooth
connection. It is preferred to use this option if it exists.
This option is supported by Metrel's Android applications.
If this option is not supported by the selected Android application then configure
a Bluetooth link via Android device’s Bluetooth configuration tool. Usually no
code for pairing the devices is needed.
The instrument and Android device are ready to communicate.
How to configure a Bluetooth link between EurotestPV Lite instrument and Metrel
Powermeter
Switch Off and On the EurotestPV Lite instrument.
Be sure that the EurotestPV Lite Bluetooth dongle A 1436 is connected and
properly initialized. If not the Bluetooth dongle must be initialized as described in
chapter 4.4.9 Error! Reference source not found..
Switch On the Metrel Powermeter.
A
second Bluetooth dongle A 1436 should be
inserted to the Powermeter’s PS/2 port.
Be sure that the second Bluetooth dongle A 1436 is properly initialized (as
PowerQ device). If not the Bluetooth dongle must be initialized as described in
chapter 4.4.9 Error! Reference source not found..
The settings in instrument’s Communication menu (see chapter 4.4.9
Communication) should be as following:
COM PORT: BT DONGLE
BLUETOOTH DEVICES: PowerQ
The EurotestPV Lite instrument and Powermeter are ready to communicate.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrel MI 3109 - Eurotest PV Lite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrel MI 3109 - Eurotest PV Lite in the language / languages: English as an attachment in your email.

The manual is 1.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrel MI 3109 - Eurotest PV Lite

Metrel MI 3109 - Eurotest PV Lite Quick start guide - Dutch - 68 pages

Metrel MI 3109 - Eurotest PV Lite User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info