Manual Metabo WIG 170 DC (page 13 of 60) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian)

658079

Zoom out

Zoom in

1/60

ENGLISH

C Foot-operated remote control unit

for stepless welding current regula-

tion.

1) with 5 m leads, plastic shell

2) with 5 m leads, aluminium shell

3) with 10 m leads, aluminium

shell

D Hand-operated remote control unit

for stepless welding current regula-

tion.

1) with 5 m leads

2) with 10 m leads

E Welding return cable, 25 mm

, 3 m

F Welding cable, 16 mm

, 3 m

G Welding visor

1) helmet

2) automatic screen

Danger!

Repairs to power tools must be

carried out by qualified electricians

only!

Welding machines in need of repair can

be sent to the service centre of your

country. Refer to spare parts list for

address.

Please attach a description of the fault to

the power tool.

The machine's packaging can be 100 %

recycled.

Worn out power tools and accessories

contain considerable amounts of valua-

ble raw and rubber materials, which can

be recycled.

These instructions are printed on chlo-

rine-free bleached paper.

In case of faults, error messages are dis-

played on the display to help identify the

source of the error.

Simultaneously the Fault LED is perma-

nently lit.

E02

Excess transformer temperature.

− The Excess temperature LED is lit.

− DO NOT switch machine OFF,

in order for the fan to cool the

machine down faster.

− If the temperature has fallen off to

normal levels, the display will show

the welding current again.

You may now continue welding.

E03

The lead to the transformer's tempera-

ture sensor may be broken.

E04

Possible short in the transformer's tem-

perature sensor lead.

E06

The machine's control has detected a

supply voltage of more than 20% below

the rated voltage.

To avoid excess primary currents the

machine shuts down.

Note:

This error message must be

acknowledged.

− Turn the machine OFF for 5 sec-

onds, then ON again.

If the error message appears again, turn

OFF and contact a qualified electrician!

E12

The arc did not start within 20 sec after

pressing the torch button.

− The machine shuts down.

− Release torch button.

The message is cleared, the

machine is ready to operate again.

E14

Excess temperature of the primary sec-

tion.

E15

The lead to the primary section's temper-

ature sensor may be broken.

E16

Possible short in the primary section's

temperature sensor lead.

E17

Excess temperature of the secondary

section.

E18

The lead to the secondary section's tem-

perature sensor may be broken.

E19

Possible short in the secondary section's

temperature sensor lead.

8. Repairs

9. Environmental Protection

10. Faults

11. Trouble Shooting

Brittle or porous weld seam

Gas valve

closed?

Open gas valve.

Gas cylinder

empty?

Replace.

Unsuitable shield-

ing gas?

Use a suitable

shielding gas.

Gas line connec-

tion not tight?

Check connec-

tions.

Pressure regula-

tor faulty?

Check pressure

regulator.

Gas shroud on

torch or torch

leads blocked?

Clean gas shroud.

Air draft at weld-

ing spot?

Screen off weld-

ing spot or

increase gas flow

rate.

Workpiece not

clean?

Remove rust,

grease or paint

coating.

Steady gas flow

Solenoid valve

faulty or dirty?

Have solenoid

valve checked by

a qualified electri-

cian.

No welding current

Welding return

cable making

poor contact?

Check welding

return cable for

proper contact.

Control PCB

faulty?

Contact

service centre.

No function of machine

Supply circuit fuse

blown or cut-out?

Replace or turn

ON again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo WIG 170 DC in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 1,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo WIG 170 DC Manual

Product: