Manual Metabo TS 254 (page 19 of 188) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

633940

Zoom out

Zoom in

1/188

ENGLISH

Safety symbol

Danger!

Failure to observe the

following warnings can

result in serious injury

or damage to property.

Read the operating instruc-

tions.

Never place hands into

running saw blade.

Wear protective goggles

and

ear protectors.

Never operate the tool in a

damp or wet environment.

3.4 Safety devices

Riving knife

The riving knife (33) prevents the work-

piece from being caught by the rising

teeth of the saw blade and being thrown

against the operator.

Always have the riving knife installed

during operation.

Blade guard

The blade guard (34) protects against

unintentional contact with the saw blade

and from chips flying about.

Always have blade guard installed dur-

ing operation.

Push stick

The push stick (35) serves as an exten-

sion of the hand and protects against

accidental contact with the saw blade.

Always use push stick if distance be-

tween saw blade and rip fence is less

than 120 mm.

Guide the push stick at an angle of 20°

… 30° against the saw table's surface.

If the push stick is not used, it has to be

stored with the machine.

Replace push stick if damaged.

Ensure firm footing and keep

your balance at all times.

Installation without machine stand:

1. Lift saw with two persons out of

packaging.

2. Place saw down on stable table or

work bench.

3. Bolt saw firmly onto table or work

bench.

Installation with machine stand:

1. Lift tool with two persons out of

packaging.

2. Place tool on ground.

3. Lift tool by handles and set up on

edge

4. Pull out handles (36), turn them and

engage them.

5. Fold out the two table legs. To do

this, press the red turning lever (37)

downwards (with your foot or hand)

and swing down the table legs.

6. Tilt the tool slightly to the rear and

press down both table legs. The red

turning levers (37) must engage.

7. Fold out the upper two table legs. To

do this, push the red turning lever

(38) to the right and swing the table

legs downwards.

The red turning levers must engage.

8. Hold the saw round the centre of the

upper frame. Pull up saw and set

down. (Hold adjustable base in posi-

tion with foot to prevent slipping of

the saw during installation).

(29) CE-mark – This machine con-

forms to the EC directives as per

Declaration of Conformity

(30) Waste disposal symbol – the

machine can be disposed of

through the manufacturer

(31) Year of manufacture

(32) Dimensions of permissible saw

blades

4. Installation

33 34

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo TS 254 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 19,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo TS 254 Manual

Product: