816557

Metabo STA 18 LTX 150 BL Manual

13
Zoom out
Zoom in
Previous page
1/88
Next page
ENGLISH en
13
8.4 LED light Fig. A
For working in badly lit areas. The LED light (4)
lights up when the machine is switched on.
STA 18 LTX 150 BL 601502000: Switch off LED (4)
via switch (18).
If the LED light is flashing, see chapter 10.
8.5 Application note Fig. D
Plunging: You can plunge the jigsaw blade into
workpieces made from thin, soft materials without
needing to drill a hole beforehand. Only use short
saw blades. Only at 0° angle setting.
Set the adjustment lever (7) to the "0" position
(pendulum motion is deactivated). Position the
jigsaw with the front edge of the footplate (17) on the
workpiece. Hold the operating jigsaw firmly and
guide slowly downwards. Once the saw blade has
penetrated the workpiece, the pendulum motion
can be activated.
Remove the battery pack from the machine before
making any adjustments, changing tools,
maintaining or cleaning.
Clean the machine regularly. This includes
vacuum cleaning the ventilation louvres on the
motor.
Clean the saw blade clamping fixture (22) regularly
and thoroughly by blowing with compressed air.
If necessary, clean the openings behind the saw
blade support roller (21).
Apply a drop of oil to the saw blade support roller
(21) from time to time.
The LED light (4) is flashing SLOWLY and the
machine has been switched off automatically.
The machine switches off if it is overloaded for an
extended period or if the saw blade is jammed.
Switch off the machine using the slide switch (19).
Switch it on again and continue to work as normal.
Avoid any additional overloading or jamming.
The LED (4) is flashing quickly and the machine
is not running. Restart protection is active. The
machine will not start if the battery pack is inserted
while the machine is on. Switch the machine off and
back on again.
Use only original Metabo or CAS (Cordless Alliance
System) battery packs and accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
Chargers: ASC 55, ASC 145, etc.
Order no.: 627044000 ASC 55
Order no.: 627378000 ASC 145
etc.
Battery packs 18V:
Order no.: 625368000 5.5 Ah (LiHD)
Order no.: 625369000 8.0 Ah (LiHD)
Order no.: 625594000 10.0 Ah (LiHD)
etc.
Fit accessories securely. If the machine is operated
in a holder: secure the machine well. Loss of control
can cause personal injury.
Fig. E p. 3:
Circular-cutting and parallel guide
For sawing circles (dia. 100 - 360 mm) and making
cuts parallel with edges (max. 210 mm).
Fig. E p. 3 I:
Attaching the circular cutting guide
- Slide the rod on the circular-cutting and parallel
guide sideways into the footplate (centre point (c)
faces downwards).
- Set the desired radius (d).
- Tighten screw (b).
Fig. E p. 3 II:
Attaching the parallel guide
- Slide the rod on the circular-cutting and parallel
guide sideways into the footplate (centre point (c)
faces upwards).
- Set the dimension (e)
- Tighten screw (b).
See www.metabo.com or the catalogue for a
complete range of accessories.
Repairs to electrical tools must only be carried
out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs must not be disposed of with regular
waste! Please return faulty or used battery packs to
your Metabo dealer!
Do not throw battery packs into water.
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
9. Cleaning, Maintenance
10. Troubleshooting
11. Accessories
12. Repairs
13. Environmental Protection
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo STA 18 LTX 150 BL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo STA 18 LTX 150 BL in the language / languages: All languages as an attachment in your email.

The manual is 4.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info