Manual Metabo Multi 310G (page 18 of 64) (English, German, Dutch, Danish)

451464

Zoom out

Zoom in

1/64

ENGLISH

1. Please Read First!.....................18

2. Safety .........................................18

2.1 Specified Conditions of Use........18

2.2 General Safety Information .........18

2.3 Symbols Used Throughout

These Instructions.......................19

3. Special Product Features.........19

4. Transportation and

Installation .................................19

4.1 Machine installation.....................19

4.2 Mains Connection .......................19

5. Operating Elements ..................20

5.1 General safety devices................20

6. Surface Planer Mode.................20

6.1 Setup...........................................20

6.2 Safety..........................................21

6.3 Operation ....................................21

7. Thickness Planer Mode ............22

7.1 Setup...........................................22

7.2 Safety..........................................22

7.3 Operation ....................................22

8. Operation as Table Saw............23

8.1 Setup...........................................23

8.2 Safety..........................................24

8.3 Operation ....................................24

9. Spindle Moulder Mode..............24

9.1 Setup...........................................24

9.2 Safety..........................................26

9.3 Operation ....................................26

10. Care and Maintenance..............26

10.1 Replacing Cutter Knives..............27

10.2 Saw blade change.......................27

10.3 Care and maintenance................28

10.4 Machine Storage.........................28

11. Available Accessories ..............28

12. Repairs.......................................28

13. Environmetal Protection...........29

14. Trouble Shooting ......................29

14.1 All operating modes ....................29

14.2 Surface/thickness planer.............29

14.3 circular saw .................................29

14.4 spindle moulder...........................29

15. Technical Specifications ..........30

16. Available Accessories ..............63

• Read these instructions before use.

Pay special attention to the safety

information.

• If you notice transport damage while

unpacking, notify your supplier

immediately. Do not operate the

machine!

• Dispose of the packing in an envi-

ronmentally friendly manner. Take

to a proper collecting point.

• Keep these instructions for refer-

ence on any issues you may be

uncertain about.

• If you lend or sell this machine be

sure to have the instructions to go

with it.

2.1 Specified Conditions of

Use

This machine provides four different

operating modes:

• Surface planer mode

for surface planing of wood and

wood-derived materials.

• Thickness planer mode

for thickness planing of wood and

wood-derived materials.

• Circular saw mode

for sawing wood and woodderived

materials. Do not use the circular

saw for rebating, tenoning and

grooving (use spindle moulder

instead).

• Spindle moulder mode

for moulding wood and wood-

derived materials.

Prior to operation the machine must be

set up for the respective operating

mode.

Set-in work is not permitted to be carried

out on the circular saw (high risk of

injury).

The permissible workpiece dimensions

must be observed (see "Technical Spec-

ifications").

Any other use is not as specified.

Unspecified use, modification of the

machine or use of parts not tested and

approved by the equipment manufac-

turer can cause unforeseen damage.

2.2 General Safety Informa-

tion

When using this electric tool observe the

following safety instructions, to exclude

the risk of personal injury or material

damage.

Please also observe the special safety

instructions in the respective chapters;

Keep all documents, supplied with the

machine, for future reference.

Observe the statuary accident insurance

institution regulations and regulations for

the prevention of accidents pertaining to

the operation of combination machines

and air tools, where applicable.



General Hazard!

Keep your work area tidy – a messy

work area invites accidents.

Be alert. Know what you are doing. Set

out to work with reason. Do not operate

electric tool while under the influence of

drugs, alcohol or medication.

Consider environmental conditions.

Keep work area well lighted.

Prevent adverse body positions. Ensure

firm footing and keep your balance at all

times. When working long stock use suit-

able supports.

Do not operate electric tool near inflam-

mable liquids or gases.

This combination machine shall only be

started and operated by persons who

are familiar with combination machines

or planers, circular saws and spindle

moulders respectively, and who are at

any time aware of the dangers associ-

ated with the operation of such machine.

Persons under 18 years of age shall use

this electric tool only in the course of

their vocational training, under the

supervision of an instructor.

Keep bystanders, particularly children,

out of the danger zone. Do not permit

other persons to touch the electric tool or

power cable while it is running.

Do not overload electric tool – use it only

within the performance range it was

designed for (see "Technical Specifica-

tions").



Danger! Risk of electric shock!

Do not expose electric tool to rain.

Do not operate electric tool in damp or

wet environment.

Prevent body contact with earthed

objects such as radiators, pipes, cooking

stoves, refrigerators when operating this

electric tool.

Do not use the power cable for any pur-

pose it is not intended for.



Risk of personal injury and

crushing by moving parts!

Do not operate the electric tool without

installed guards.

Always keep sufficient distance to the

cutting tool. Use suitable feeding aids, if

necessary.

Keep sufficient distance to motor and

driven components when operating elec-

tric tool. Ensure electric tool is discon-

nected from power supply before servic-

ing.

Ensure that when switching on (e.g. after

servicing) no tools or loose parts are left

on or in the electric tool.

Turn power off if the electric tool is not

used.



Cutting hazard, even with the

cutting tool at standstill!

Wear gloves when changing cutting

tools.



Risk of kickback (workpiece is

caught by the saw blade and thrown

against the operator):

Table of Contents

1. Please Read First!

2. Safety

XW0008E.fm Operating Instruction ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo Multi 310G in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 4,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo Multi 310G Manual

Product: