451459

Metabo KS 254 Plus Manual

25
Zoom out
Zoom in
Previous page
1/56
Next page
2.10
KS 250
Sawhead shaft adjustment
The sawhead shaft must be set as follows:
- the sawhead must swing up to its upper rest
position automatically, and
- the sawhead must not wobble from side to side.
· To adjust:
- Turning screw clockwise = hinge mechanism
is tightened, play is reduced
- Turning screw counter-clockwise = hinge
mechanism is loosened, play is increased.
Kerf plate replacement
The kerf plate must be replaced if the slot is dam-
aged.
1. Unscrew the three screws on the table insert
extrusion.
2. Remove the damaged kerf plate from the saw
table (put a screw driver into the slot and lever
the kerf plate out of the table).
3. Insert new table insert extrusion and screw it
down.
Carbon brushes check and replacement
3
Worn carbon brushes are noticeable by
- irregular running of the motor;
- static in radio/TV while the motor is run-
ning;
- stopping of the motor.
To check or replace carbon brushes:
1. Unplug power cable.
2. Unscrew brush plug from motor frame with a
suitable screw driver.
In the illustration the replacement of the front
carbon brush is shown. The rear carbon brush is
located on the opposite side.
3. Pull carbon brushes out and check. Each car-
bon brush must be at least 6 mm long.
4. Put intact brushes into the brush holder. The two
lugs on the sides of the small metal plate must
fit into the grooves of the brush holder.
5. Replace the brush plugs.
6. Check the functioning of the saw.
Saw cleaning
· Remove chips and saw dust with brush or vac-
uum cleaner from:
- motor vent openings;
- hollow space under the turntable;
- setting devices;
- operating controls.
Also remove chips and saw dust from inside the
saw, if necessary.
Saw transportation
1. Swing sawhead down.
2. Push locking pin in.
3. Remove all accessories projecting over the saw
table.
If possible use original carton for shipping.
Saw storage
A
Danger!
Store saw so that
- it can not be started by unauthorized per-
sons and
- nobody can get hurt by the stored
machine.
A
Caution! Do not store machine unprotected
outdoors or in damp environment.
6mm
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo KS 254 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KS 254 Plus in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info