625623
12
Zoom out
Zoom in
Previous page
1/92
Next page
12
ENGLISH
ENG
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory
diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chro-
mate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
Always wear protective goggles, gloves, and
sturdy shoes when working with this tool.
Ensure that the spot where you wish to work is free
of
power cables, gas lines or water pipes
(e.g.
using a metal detector).
If the safety coupling responds, switch off the
machine immediately.
Do not touch the rotating tool!
Remove chips and similar material only with the
machine at standstill.
Caution must be exercised when driving screws
into hard materials (driving screws with metric or
imperial threads into steel)! The screw head may
break or a high reverse torque may build up on the
handle.
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
See page 3 (please unfold).
1 Keyless chuck *
2 SDS chuck
3 Tool lock
4 Keyless chuck sleeve
5 Chuck lock
6Spindle
7Depth stop
8 Speed preselection wheel*
9 Electronic signal indicator
10 Rotation selector switch
11 Lock button
12 Trigger switch
13 Switch button (for changing the operating
mode)
14 Lock
15 Additional handle
16 Safety coupling
* equipment-dependent
Exchangeable chuck
The SDS chuck can be exchanged for the keyless
chuck using a simple procedure that does not
require extra tools.
Single-button control
A single switch button allows you to select the gear
and to switch between drilling, hammer drilling and
chiselling modes.
Rotary stop:
Chiselling can be done if the rotary motion is
switched off,.
Safety coupling:
If the tool jams or catches, the power supply to the
motor is restricted. Due to the strong force which
can arise, always hold the machine with both
hands using the handles provided, stand securely
and concentrate.
Carbon brushes with wear indicator:
An LED indicates that the carbon brushes are
almost completely worn. The machine switches off
automatically when the brushes are worn.
Restart protection
The restart protection prevents the tool from
starting unintentionally when being plugged in
again or when power is restored after a power
failure.
Before plugging in check to see that the
rated mains voltage and mains frequency, as
stated on the rating label, match with your power
supply.
7.1 Assembly of the additional handle
For safety reasons, always use the additional
handle supplied.
Open the clamping ring by turning the additional
handle (15) anticlockwise. Slide the additional
handle over the clamping collar on the machine
(grooves on the machine collar and the mark on
the additional handle must line up). Insert the
depth stop (7). Securely tighten the additional
handle at the angle required for the application.
5Overview
6 Special Product Features
7 Commissioning
17026909_0608 UHE KHE 28 Plus KHE Partner Edition.book Seite 12 Dienstag, 17. Juni 2008 3:51 15
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo KHE 28 Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KHE 28 Plus in the language / languages: All languages as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info