Manual Metabo KGS 254M (page 12 of 65) (English, German, Dutch, French, Italian, Portuguese, Spanish)

451438

Zoom out

Zoom in

1/65

ENGLISH

1. Declaration of Conformity..... 12

2. Components in the layout 

diagram................................... 12

3. Please Read First!.................. 12

4. Safety ......................................12

5. Installation and Transport.....14

6. Machine Details...................... 14

7. Initial Operation ..................... 14

8. Operation................................ 15

9. Care and Maintenance........... 16

10. Tips and Tricks ...................... 17

11. Available Accessories...........17

12. Repair...................................... 17

13. Disposal.................................. 17

14. Trouble Shooting ...................18

15. Technical Data ....................... 18

We declare in full responsibility that this

product conforms woth the standards

and directives referred to on page 3.

Figure see page 2.

– Read instructions before use. Pay

special attention to the safety infor-

mation.

– These instructions are intended for

persons with ba

sic technical knowl-

edge regarding the operation of a de-

vice like the one described herein. If

you

have no experience whatsoever,

you are strongly advised to seek com-

petent advise and guidance from an

xperienced person before operating

this machine.

– Preserve all documents delivered to-

gether with this device. Retain proof

f purchase in case of warranty

claims. If you lend or sell this machine

be sure to have all machine docu-

ments supplied go with it.

– The equipment manufacturer is not li-

able for any damage resulting from

neglect of these operating instruc-

tions.

Information in this manual is denoted

as follo

ws:

ADanger!

Risk of personal injury or

environmental

damage.

BRisk of electric shock!

Risk of personal injury by electric

shock

cDrawing-in/trapping hazard!

Risk of personal injury by body parts or

clo

thing being drawn into the rotating

saw blade.

A Caution!

Risk of material damage.

3 Note:

Additional information.

– The numbers in the figures at the be-

ginning of these instructions

– indicate component parts;

– are consecutively numbered;

– relate to the corresponding

number(s) in brackets (1), (2), (3)

... in the text.

– Numbered steps must be carried out

n sequence.

– Instructions which can be carried out

in any sequence are marked with a

bullet (•).

– Listings are indicated by an En Dash (–).

4.1 Specified conditions of

use

The crosscut and mitre saw is suitable

for rip and cross cuts, bevel cuts, mitre

cuts and compound mitre cuts. It can

also be used for grooving.

Only materials for which the corre-

sponding saw blade is suitable may be

cut

(for allowable saw blades please

see chapter 'Available accessories'.

Allowable workpiece dimensions must

heeded (see chapter 'Technical

specifications'.

Stock having a round or irregular cross

section (such as fi

rewood) must not be

cut, as it cannot be securely held during

cutting. When sawing thin stock layed

on edge, a suitable auxiliary fence must

be used for firm support.

Any other use is not as specified. Un-

specified use, modifications to the ma-

chine, or use of parts not tested and

proved by the manufacturer may

cause unforeseeable damage!

4.2 General Safety Instruc-

tions

 When using this machine observe the

following safety instructions, to mini-

mize the risk of personal injury or ma-

terial damage.

 Please also observe the special safe-

ty instructions in the respective

sec-

tions.

 Where applicable, follow the legal di-

rectives or regulations for the preven-

tion of accidents pertaining to the use

of crosscut saws.

AGeneral hazards!

 Keep your work area tidy – a messy

work area invites accidents. Halten

Sie den Fußboden frei von losen Par-

tikeln wie z. B. Spänen und Schnit-

tresten.

 Be alert. Know what you are doing.

Set out to work with reason. Do not

operate tool while under the influence

of drugs, alcohol or medication.

 Consider environmental conditions.

Keep work area well lit.

 Prevent adverse body positions. En-

sure firm footing and keep your bal-

ance at all times.

 Do not operate the machine near in-

flammable liquids or gases.

 This tool may only be started and op-

erated by persons familiar with cross-

cut saws and who are aware of the

dangers associated with the operation

of such tools. 

Persons under 18 years of age shall

use

this device only in the course of

their vocational training, under the su-

pervision of an instructor.

 Do not allow other people, especially

children, to touch the electric tool or

the cord. Keep them away from the

work area.

 Do not overload device – use it only

within the performance range it was

designed for (see “Technical Specifi-

cations”).

 Use the correct electric tool. Do not

use inefficient machines for heavy du-

ties. Do not apply electric tools for

rposes they are not intended for.

Do for instance not use a circular

Table of Contents

1. Declaration of Conformity

2. Components in the layout

diagram

1 Handle

2 Carrying handle

3 Carbon brushes

4 Motor

5 Chip bag

6 Dust extraction adapter

7 Transport locking pin

8 Cable hook

9 Holder for Allen key 6 mm

10 Track arm guide bars

11 Track arm lock screw

12 Cutting area illumination

13 Sawhead tilt lock lever

14 Fence

15 Table side extension

16 Stop lever for table extension

17 Lock screw for rotating table

18 Positive stop table lock lever

19 Table insert

20 Saw base (table)

21 Rotating table

22 Work clamp

23 Laser outlet

24 Retractable blade guard

25 Saw blade stop

26 Safety lock

27 Saw ON/OFF switch

3. Please Read First!

4. Safety

I_0011en6A.fm 9.5.11 Original operating instructions

my blade grad is not retracting when I bring cutting head down Submitted on 6-5-2022 at 14:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KGS 254M in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo KGS 254M Manual

Product: