Manual Metabo HDM 1000 (page 21 of 56) (English, German, Dutch, French)

451429

Zoom out

Zoom in

1/56

Set the toolrest as close as possible against the workpiece

(5-10 mm), and set height to centre line. Before starting

work turn workpiece by hand to see if it can turn freely,

and check that all levers are tightened.

Advance the revolving centre to lock the workpiece

between the centres. Tighten the lock lever to keep the

centre sleeve from working loose.

10 Faceplate Turning

Select appropriate spindle speed by changing the belt on

the pulleys. For safety reasons always start with the

lowest speed.

To change the spindle speed, loosen the starknob and lift

the motor. See label in drive cover for correct tension of

the drive belt.

Switch on motor only after the machine is correctly set,

the proper seat of the workpiece has been checked, and

all knobs and levers are tightened.

- Always work from right to left.

- Adjust the toolrest position when the workpiece’s

diameter becomes smaller.

Attach faceplate to workpiece with at least 4 screws.Cut waste away with band saw or jig saw to bring

workpiece into rough shape.

- Give workpiece a visual check and tapping test to find

any possible cracks.

- Do not use workpieces with cracks. High risk of burst

ing caused by the centrifugal force.

Mark position of faceplate with a compass on the

workpiece.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo HDM 1000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo HDM 1000 Manual

Product: