451417

Metabo BW 600 Manual

15
Zoom out
Zoom in
Previous page
1/52
Next page
15
ENGLISH
For special tasks the following accesso-
ries are available at your specialized
dealer – see back cover for illustrations:
A Saw blade SP 600 x 2.8 x 30 56
KV
Standard saw blade
B Saw blade CV 600 x 2.8 x 30
56 WZ
CV steel, for hardwoods and soft
wood.
C Saw blade HW 600 x 3.9/2.8 x 30
26 WZ
Tungsten carbide tipped, espe-
cially for hardwoods and an
extended edge life.
A
Danger!
Repairs to electric tools must
be carried out by qualified electri-
cians only!
Electric tools in need of repair can be
sent to the service centre of your coun-
try. Refer to the spare parts list for the
address.
Please attach a description of the fault to
the electric tool.
The machine's packing can be 100%
recycled.
Worn out electric tools and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on chlo-
rine-free bleached paper.
A
Danger!
Before carrying out any fault
service or maintenance work, always:
− switch machine OFF;
− unplug power cable;
− wait for saw blade to come to
standstill.
Check that all safety devices are
operational again after each fault
service.
Motor does not run
No mains voltage:
− check cables, plug, outlet and mains
fuse.
Mains voltage too low:
− Use power cable of sufficient lead
cross section (see "Technical speci-
fications").
No-voltage release solenoid tripped by
temporary power failure:
− switch on again.
Overload protection tripped:
let motor cool down for approx. 10 min-
utes, then start motor again.
Motor lo cked, e.g. by a blocked saw
blade:
− Remove cause for blocking, let
motor cool down if necessary, then
start motor again.
Incorrect rotational direction of saw
blade
Phase sequence changed at the phase
changer:
− Change direction of rotation (see
"Mains connection").
Poor cutting performance
Saw blade blunt (possibly tempering
marks on blade body):
− Have saw blade resharpened or
replace it (see "Maintenance").
Set of teeth insufficient:
− Have teeth set properly or replace
saw blade (see "Maintenance").
Saw blade soiled by resin:
− Clean saw blade (see "Mainte-
nance").
Wood is too wet:
− Let wood try before cutting.
8. Available accessories
9. Repairs
10. Environmetal protection
11. Trouble shooting
12. Technical specifications
Electrical data Voltage
Nominal current
Fuse protection min. (time-lag or K-type breaker)
Protection class
V
A
A
400 (3 ∼ 50 Hz)
6.5
10
IP 54
Motor: Power input P1
Power output P2
Speed
kW
kW
min
-1
4.2 kW S6 40%
2.7 kW S6 40%
1250
Saw blade Maximum diameter (outer)
Arbor bore diameter (inner)
Thickness
Maximum cutting speed
mm
mm
mm
m/s
600
30
2.8
39
Maximum dimensions of logs to be cut
Maximum diameter (reversing cut)
Minimum diameter
Maximum length
Minimum length
mm
mm
mm
mm
210
25
1000
300
Machine dimensions
Length
Width
Height
mm
mm
mm
1225
795
1050
Machine weight kg 102
* The values stated here only indicate the loudness emitted by this machine. Whether the operator is required to wear hearing pro-
tection can not be determined here. This depends on how much noise reaches the ear of the operator. And this, among other
things, depends on the existing ambient conditions (such as other sources of noise near by). Even though it may not be explicitly
required, it is in your own interest to always wear hearing protection when operating this machine.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BW 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BW 600 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info