600611

Metabo BLL 2-15 Manual

8
Zoom out
Zoom in
Previous page
1/64
Next page
8
en
Main applications:
Operating modes
The BLL 2-15 can be used in 2 operating modes:
1. As easy-setup floor line laser 2. As tile laser combined with special base
for layout work base enabling exact positioning for
edge-precise alignment of tile layouts
Commissioning
The instrument is switched on with the on/o switch (1). Laser lines appear
a er switching on. An angle of 90° is thus projected on the
floor
. The inter-
section of the laser lines enables easy alignment and measuring. The BLL 2-15
can be set up very close in a corner. The locating edges for the base correspond
to the position of the laser lines. Measuring tools and, if required, a target
plate make a fully accurate alignment to the surroundings (corner, wall etc.)
possible. The BLL 2-15 can therefore be aligned to a reference plane.
Operating mode as floor line laser
The base is positioned with its locating teeth upwards below the laser device.
The BLL 2-15 is easily set up and aligned at a mark.
Operating mode as tile laser
The interchangeable base enables exact positioning at the edges of tiles/slabs.
The BLL 2-15 can be positioned to the side of a tile / within several tiles.
Changing over the base with the locating teeth downwards allows the BLL
2-15 to be positioned on a tile as well.
The laser lines are therefore aligned accurately with the tile edges, while
projecting extension lines precisely onto the
floor
.
Checking the calibration
The floor line laser BLL 2-15 is designed for use on construction sites and left
our factory perfectly adjusted. As with any precision instrument, however,
its calibration must be regularly checked. The unit should be checked before
starting any new tasks, particularly when the unit has been exposed to
strong vibrations.
B1
C1
C2
C3
C4
B2
D2
D3
D1
D4
D5
D6
D1
C1
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BLL 2-15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BLL 2-15 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info