451403
18
Zoom out
Zoom in
Previous page
1/56
Next page
C The arc scale is adjusted after having loose-
ned the three clamping screws.
B It is advisible to check the adjustment with
a test cut.
8.2 Mitre fence
A - The 0° (90°) end
point of the mitre fence
is fitted with a stop
screw. Through scre-
wing the stop screw in
or out, the end point
can be given a fine
adjust-ment.
8.4 90° Setting of the saw blade
The 90° position of the saw blade relative to its table can
be corrected through sliding the chip thousing. In order
to do that you have to loosen the connection screws
between the chip case and the cross-tie first.
8.3 Central position of the saw blade
Underneath the table there are adjustment screws on
both sides of the chip case.
After the clamping screws of the chip case have been
loosened, the saw blade can be slid sideways by turning
the adjustment screws in or out.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BKH 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BKH 400 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 6,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info