451403
15
Zoom out
Zoom in
Previous page
1/56
Next page
The switch does not click in as long as the machine is not
connected to the electric mains. In case of a power cut
the switch will automatically be opened through a built-
in relay. This means that the saw has to be switched on
again after regaining power supply. In case of the motor
being overloaded, a built-in automatic circuit-breaker
will switch it off. Overloaded and thus overheated motors
should not be re-started until 10 minutes have passed.
Saws with alternating current have a built-in force driven
brake (braking motor) which is designed to prolong the
life of the saw. Brakes have to be changed when the
slowingdown effect is reduced and the stopping time
exceeds 10 seconds.
Please ask a specialized dealer. An ineffective break will
increase the danger of accidents!
6.4 Switch/Safeguard against overloading/Motor brake
7.2 Setting/Application of the protective hood
Set blade guard only with blade at complete standstill.
Danger of injury!
In case of through-cuts, longitudinal or across, the
protective hood must be fitted in a way that its distance
to the workpiece does not exceed 8 mm.
The protective hood must be fitted all the time, apart
from insertion- or concealed-cuts Para. 9.2 and 9.5 of
this manual. U.K. users see para. 6.5).
6.5 U.K. Industrial Use
Within the U.K., this machine falls under the Woodworking Machinery Regulations 1974, under which certain operations, e.g.
grooving, rebatting, tenoning and moulding are prohibited without special guards. For your own safety it is recommended to
follow the instructions given in the Health and Safety at Work booklet No. 41, entitled "Safety in the Use of Woodworking
Machines" and "A Guide to Woodworking Machinery Regulations" HS(R)9. Both publications are available from Her Majesty's
Stationary Office and other bookshops.
7 Operating/Setting
7.1 Setting the riving knife
- Before starting work, always pull the plug from the socket !
- The riving knife must be fitted all the time, apart from insertion (charging) cuts (point 9.3 of the operation instructions).
The riving knife has to be fixed so that the distance from the saw blade edge is not more than 10 mm radially, and 2 - 3 mm
in height.
- The riving knife prevents the locking of the kerf behind the saw blade and the jamming of the workpiece.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BKH 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BKH 400 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 6,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info