595150

Metabo BE 75 QUICK Manual

8
Zoom out
Zoom in
Previous page
1/47
Next page
ENGLISHen
8
back into position at the required angle and secure
tightly.
7. Use
7.1 Switching On and Off
To start the machine, press the trigger (4).
The speed can be changed by pressing in the
trigger.
For continuous operation, the trigger can be locked
wit
h the lock button (5). To stop the machine, press
the trigger again.
In continuous operation, the machine
continues running if it is forced out of your
h
ands. Therefore, always hold the machine
with both hands using the handles provided,
stand in a safe position and concentrate.
7.2 Selecting the direction of rotation
Do not activate the rotation selector
switch (3) unless the motor has
completely stopped.
Selecting the direction of rotation:
R=clockwise
L = counter-clockwise
0=Central position: tran
sport lock setting
(switch-on lock)
7.3 Tool Change with Geared Chuck
(1)
See illustrations A, page 2.
Opening the drill chuck: Open the ge
ared chuck
with chuck key -1.
Clamping the tool: In
sert tool -2- as far as possible
and, using the chuck key, evenly secure in all 3
bores -3.
7.4 Drill chuck with "Quick" change system
(for
BE 75 Quick)
To remove: Push
the interlock ring forward (a),
advance and pull off the chuck (b). (1)
To mount: (1) Push the interlock ri
ng forward and
move the chuck as far as the li
mit stop on the drill
spindle.
8. Troubleshooting
If the trigger (4) cannot be depressed, check that
the direction of rotation selector switch (3) is fully set
to the R or L position.
9. Accessories
Use only genuine Metabo accessories.
Use only accessories that fulfil the requirements
and s
pecifications listed in these operating instruc-
tions.
Fit accessories securely. Secure the machine if it is
oper
ated in a bracket. Loss of control can cause
personal injury.
For a complete range o
f accessories, see
www.metabo.com or the main catalogue.
10. Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
If you have Metabo electrical
tools that require
repairs, please contact your Metabo service centre.
For addresses see www.metabo.com.
You can download spare parts lists from
ww
w.metabo.com.
11. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately and
handed in for environmentally compatible recycling.
12. Technical Specifications
Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
P
1
=Rated input
P
2
=Power output
n
1
* =No-load speed
n
2
* =Load speed
max. dia. =Max. solid drill diameter
b =Chuck capacity
G=Spindle thread
m=Weight
D =D=Collar diameter
Measured values determined
in conformity with
EN 60745.
Machine in protection class II
~ Alternating current
The technical specifications quoted are subject to
tol
erances (in compliance with the relevant valid
standards).
* Energy-rich, high-frequen
cy interference can
cause fluctuations in speed. However, the fluctua-
tions disappear as soon as the interference fades
aw
ay.
Emission values
Using these values, you can estimate the
em
issions from this power tool and compare these
with the values emitted by other power tools. The
actual values may be higher or lower, depending on
the particular application and the condition of the
tool or power tool. In estimating the values, you
should also include work breaks and periods of low
use. Based on the estimated emission values,
specify protective measures for the user - for
example, any organisational steps that must be put
in place.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BE 75 QUICK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BE 75 QUICK in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info