595150

Metabo BE 75 QUICK Manual

7
Zoom out
Zoom in
Previous page
1/47
Next page
ENGLISH en
7
Original instructions
1. Declaration of Conformity
We, being solely responsible, hereby declare that
these drills, identified by type and serial number *1),
meet all relevant requirements of directives *2) and
standards *3). Technical documents for *4) - see
page 3.
2. Specified conditions of use
The drill is suitable for non-impact drilling into metal,
wood, plastic and similar materials. It is also suit-
able for thread tapping and screwdriving.
The user bears sole responsibility for any damage
c
aused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
ob
served.
3. General safety instructions
For your own protection and for the
protection of your power tool, pay atten-
tion to all parts of the text that are marked
with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fi
re and/or serious injury.
Keep all safety instructions and information for
fu
ture reference.
Pass on your electrical tool only t
ogether with these
documents.
4. Special Safety Instructions
Use the additional handle supplied with the
tool. Loss of control can cause personal injury.
Hold the power tool by the insulated gripping
s
urfaces when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. If the cutting accessory
contacts a "live" wire, exposed metal parts of the
electrical tool may become "live" and give the oper-
ator an electric shock.
Pull the plug out of the plug so
cket before carrying
out any adjustments or servicing.
Avoid inadvertent starts by always unlocking the
switch wh
en the plug is removed from the mains
socket or in case of a power cut.
Ensure that the spot where y
ou wish to work is free
of power cables, gas lines or water pipes (e.g.
by using a metal detector).
Smaller workpieces must be secured to prevent
th
em from being carried along with the drill bit
during the drilling process (e.g. by clamping in a
vice or on a work bench with screw clamps).
Keep hands away from the rotating tool!
Remove
chips and similar material only when the machine is
at a standstill.
Metabo S-automatic safety clutch. When the safety
c
lutch responds, switch off the machine immedi-
ately! If the tool jams or catches, the power supply
to the motor is restricted. Due to the strong force
that can be generated, always hold the machine
with both hands using the handles provided, stand
in a steady position and concentrate on the work
being carried out.
The Metabo S-automatic safety clutch mus
t not be
used for torque control.
Caution when carrying out hard screwdriving
(
driving of screws with either a metric or an imperial
thread into steel)! The head of the screw may be
ripped off or high restoring torques may occur on
the handle.
Dust from material such as paint containing lead,
so
me wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory diseases
to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic,
suc
h as oak and beech dust, especially in
conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Use a dust extraction device wh
ere possible.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is recom-
mended.
Follow national requirements for
the materials you
want to work with.
5. Overview
See page 2.
1Geared chuck
2 Additional handle
3 Rotation selector switch
4Trigger
5 Lock button (continuous operation)
6. Initial Operation
Before plugging in the device, check that
the rated mains voltage and mains
frequency, as specified on the rating label,
match your power supply.
6.1 Assembly of the additional handle
For safety reasons, always use the addi-
tional handle supplied.
Open the clamping ring by turning the
additional
handle (2) anticlockwise. Push the additional
handle onto the collar of the machine. Advance the
additio
nal handle until it can be twisted. Then pull it
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BE 75 QUICK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BE 75 QUICK in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info