658438
13
Zoom out
Zoom in
Previous page
1/88
Next page
ENGLISH
13
ENG
8.2 Preselecting the speed
Use the setting wheel (7) to pre-select the max.
speed. See page 4 for recommended drilling
speeds.
8.3 Speed selection
Select the desired speed by turning the thumb-
wheel (4).
Change speed only when the machine is in the
process of running down (briefly switch it on and off).
1st speed
(low speed, high torque) e.g. for
screwdriving, drilling
2nd speed
(high speed) e.g. for drilling
8.4 Selecting the direction of rotation
Do not actuate the rotation selector
switch (9) unless the motor has
completely stopped.
Selecting the direction of rotation:
R = clockwise
L = counter-clockwise
The drill chuck must be firmly screwed
onto the spindle, and the safety screw
inside the drill chuck must be firmly tightened
with a screwdriver. This safety screw is model-
specific and as such may not be in all models.
THE SAFETY SCREW HAS A LEFT-HANDED
THREAD! As such, it could become loose if
rotated counterclockwise (during screwing for
example).
8.5 Tool change with a geared chuck (1)
Chucking the tool:
Insert the tool and use the
chuck key to uniformly clamp tight all 3 bores.
Removing the tool:
Open the geared chuck with
the chuck key and remove the tool.
8.6 Tool change with Futuro Plus keyless
chuck (2)
Insert tool. Grip the retaining ring (a) firmly and,
with the other hand, turn sleeve (b) towards "GRIP,
ZU", until the mechanical resistance which can be
felt is overcome.
Caution! The chuck is not yet fully tightened!
Keep turning (
there is a "clicking" sound while
turning
), until further turning is no longer possible -
only now
is the tool
securely
tightened.
With a soft tool shank, retightening may be required
after a short period of operation.
Opening the drill chuck:
Grip the retaining ring (a) firmly and, with the other
hand, turn the sleeve (b) towards "AUF,
RELEASE".
Note:
The ratchet sound which can possibly be
heard after opening the drill chuck is functional and
is switched off by a reverse rotation of the sleeve.
If the chuck is extremely tightened:
Unplug. Hold
drill chuck with an open-end spanner at the flats on
its head and turn the sleeve (b) hard towards "AUF,
RELEASE".
8.7 Tool change with Futuro Top keyless
chuck (3)
Insert tool. Grip the retaining ring (a) firmly, and use
your other hand to turn the sleeve (b) against the
stop. To open the drill chuck, grip the retaining ring
(a) firmly and turn the sleeve (b) in the opposite
direction.
x 3
a
b
b
a
170267550_0208 BE 710.book Seite 13 Donnerstag, 31. Januar 2008 10:45 10
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BE 1020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BE 1020 in the language / languages: All languages as an attachment in your email.

The manual is 4,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info