451401
23
Zoom out
Zoom in
Previous page
1/48
Next page
23
ENGLISH
Motor does not run
Undervoltage relay tripped by power fail-
ure.
Switch on again.
No mains voltage
Check cables, plug, outlet and
mains fuse.
Band saw blade wanders off the line
of cut or runs off the band saw
wheels
Band saw blade is not running properly
on the band saw wheels:
Correct tracking (see “Care and
Maintenance”).
Band saw blade breaks
Incorrect tension:
correct band saw blade tension (see
“Care and Maintenance).
Load too high:
reduce pressure against band saw
blade (reduced feed speed).
Incorrect band saw blade:
replace band saw blade (see “Care
and Maintenance”):
Contour cuts =
narrow band saw blade,
Straight cuts =
wide band saw blade.
Band saw blade warped
Load too high:
avoid lateral pressure on the band
saw blade.
Saw vibrates
Insufficient mounting:
Fasten saw properly to a suitable
floor (see “Initial Operation”).
Saw table loose:
Align and fasten saw table.
Motor mount loose:
Check fastening screws, tighten if
necessary.
Dust extraction port blocked
No dust collector connected or suction
capacity insufficient:
Connect a dust collector or increase
suction capacity (air speed 20 m/
sec at dust extraction port).
15. Technical Specifications
WNB DNB
Voltage V 230 (1~ 50 Hz) 400 (3~ 50 Hz)
Nominal current A 7 3.6
Fuse protection A 10 (time-lag or K-Automat) 10 (time-lag or K-Automat)
Protection class IP 54 IP 54
Degree of protection I I
Capacity power input P1
effective shaft output P2
kW
kW
1.5 kW S1 100%
1.1 kW S1 100%
1.9 kW S6 40%
1.5 kW S6 40%
Rated no-load speed min
-1
1400 1400
Cutting speed m/min 68/ 176/ 375/ 967 (±10%) 68/ 176/ 375/ 967 (±10%)
Band saw blade length mm 3380 3380
Max. throat capacity mm 440 440
Max. capacity under guide mm 280 280
Max. band saw blade width mm 25 25
Max. band saw blade thickness mm 0.5 0.65
Dimensions
Machine in packing
Length
Width
Height
Machine ready for work (saw table horizontal)
Length
Width
Height
Saw table only
Length
Width
mm
mm
mm
mm
mm
mm
mm
mm
820
720
1860
640
536
834
639
1860
640
536
Weight
Machine ready for work (with accessories supplied) kg 146 146
Permissible ambient temperature for operation
Permissible temperature for transport and storage
° C
° C
0 to + 40
0 to +4 0
0 bis + 40
0 bis + 40
Noise emission values*, idle running,
A-sound pressure level L
pA
A-sound power level L
WA
dB (A)
dB (A)
75.0
84.6
75.0
84.6
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BAS 505G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BAS 505G in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info