451400
13
Zoom out
Zoom in
Previous page
1/56
Next page
Item Description Stock-no.
122 Circlip 17x1 DIN 471 640 004 7357
123 Circlip 8x0.8 DIN 471 640 004 7330
126 Clamping sleeve 8x16 650 305 0429
127 Hex. head screw M 6x20 610 300 1135
128 Hex. nut M 6 620 000 2219
129 Door, upper 100 900 8809
130 Door, lower 100 900 8817
131 Door latch with bolt 701 412 1832
132 Pilot pin guide ass'y 100 900 9570
133 Sheet metal screw 4.8x22 617 200 1848
134 Washer A 5.3 DIN 125 630 001 6357
135 Wing nut M 8 700 513 5529
200 Table, 3-section ass'y 100 913 8885
201 Rip fence carrier extrusion 548 138 311 5058
202 Table end extrusion 548 138 311 4485
203 Hex. flat nut M 8 620 502 9131
204 Flange nut M 8 620 911 0995
205 Hex. nut M6, self-locking 620 200 2291
210 Saw band guard 20 148 240 2484
211 Piano hinge 40x0.8x200 701 507 4137
212 Cross recessed raised counter- 612 300 2014
sunk head screw M 4x8
213 Serrated lock washer A 4.3 630 408 4020
216 Connecting tube 238 011 3662
217 Hand guard, right 138 240 4013
218 Hand guard, left 138 213 1130
220 Starknob screw M 6x28 700 108 7775
221 Pan head tapping screw 4.8x13 617 201 5687
222 Switch plate 138 2411052
223 Switch BAS 500 WNB 100 915 5712
Switch BAS 500 DNB 100 915 5704
224 Hex. head screw M 5x12 610 300 1100
225 Hex. head screw M 8x30 610 303 1271
226 Guide extrusion 138 040 4164
227 Dish spring 12x6.2x0.6 705 308 1619
228 Carriage bolt M 6x20 611 000 0608
229 Washer A 6.4 DIN 125 630 001 6365
233 T-joint 138 840 3990
234 Spiral suction hose Ø100x600 785 413 9333
235 Spiral suction hose Ø100x200 785 413 9341
236 Hose clamp 781 103 6697
238 Sleeve SPA 139 100 6179
240 Hex. nut M 6 620 000 2219
241 Hex. head screw M 6x20 614 311 7357
7000 Motor 1.1kW 220-240V 100 900 8990
7000 Motor 1.5 kW 380-415V 100 916 6684
7002 V-belt SPZ 862 723 004 7396
7003 V-belt SPZ 1562 723 004 7400
7004 Angle scale table trunnion 0 - 45° 114 241 4291
all items from 7000 and up not shown in drawing
13 Spare Parts List BAS 500
Item Description Stock-no.
4 Guide support 138 004 4990
5 Lower band saw wheel ass'y 100 901 0870
6 Upper band saw wheel ass'y 100 901 0862
7 Intermediate wheel 724 005 0875
8 Motor pulley 724 004 5014
9 Tension bracket 138 206 9060
10 Wheel carrier bracket 100 900 8850
11 Intermediate wheel support 100 900 8914
12 Saw blade guard ass'y 100 914 6659
14 Bracket 721 405 0433
16 Blade tensioner 100 901 0820
17 Parallel pin 10x100 650 008 7283
18 Lower bearing shaft 148 504 6093
19 Upper bearing shaft 148 504 6107
20 V-belt tensioner 100 901 0161
21 Guide bearing, c/w shaft 100 901 0935
22 Threaded bolt w/gear 100 900 8876
24 Table insert, wide slot 138 140 4419
25 Pilot pin 6.9x5.9x35 138 205 2818
26 Handwheel 624 113 3255
28 Starknob M 8x65 700 104 7374
36 Hex. nut M 16x1.5 620 005 0477
37 Hex. nut M 20x1.5 620 004 6208
51 Starlock w/o cap Ø 10 mm 701 605 0711
57 Grooved ball Bearing 6203 LLU 710 001 7703
59 Spacer bushing 8x70 644 208 4660
60 Set collar A 8 641 005 0461
70 Crank handle 700 401 7433
75 3-roller guide ass'y 100 901 8022
76 Thrust bearing, h.d., w/shaft 100 901 0951
77 Ratchet lever M 6 700 607 2385
78 Starknob screw M 6x28 700 108 7775
79 Table insert, narrow slot 138 140 4400
82 Brush 913 208 1414
83 Linsenblechschraube ST 3.5x9.5 - C-H 617 202 8215
84 Table trunnion, lower 238 041 4301
85 Table trunnion, upper 238 041 4310
87 Fence extrusion 450 mm 139 300 5307
88 Rip fence carrier 138 008 1896
89 Rip fence scale, metric 114 108 6363
90 Bolt guide 138 208 3667
91 Bolt guide 138 200 2888
92 Clamp, saw blade guard, 20 148 240 2816
94 Pin guide seat 148 207 1003
96 Suction port Ø 100 138 105 3489
97 Glide piece 138 109 2115
98 Spacer bushing 8x50 644 208 4643
99 Knurled nut 624 112 5058
100 Carriage bolt M 8x30 611 000 0659
101 Carriage bolt M 8x50 611 008 0245
102 Carriage bolt M 6x40 611 000 0616
103 Carriage bolt M 8x100 611 008 2701
105 Cap screw M 6x55 612 000 0100
106 Carriage bolt M 8x20 611 001 7942
107 Set screw M 6x12 616 105 0910
108 Washer A 8.4 DIN 125 630 001 6322
109 Washer A 8.4 DIN 9021 630 500 2486
110 Washer A 6.4 DIN 9021 630 500 2087
111 Spring washer A 8,4 630 400 1745
112 Spring washer B 20 630 104 7329
113 Spring washer B 16 630 100 0292
114 Hex. nut M 8 620 000 2235
115 Hex. flat nut M 6 620 502 8046
117 Cap nut M 8 620 100 2131
118 Tension frame 100 900 8833
120 Disc spring 20x10x0.8 705 301 0088
121 Disc spring 31.5x16.3x1.75 705 304 7380
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BAS 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BAS 500 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info