Manual Metabo BAS 450 (page 14 of 42) (English, German, Dutch, French, Swedish, Spanish)

451399

Zoom out

Zoom in

1/42

6.5 Setting of Cutting Height

The upper blade guide always should be set as close as possible against the work. To adjust,

loosen ratched lever (39), located below handwheel (27) at side of upper wheel housing, and set

guide to required position by turning the handwheel. Tighten ratched lever after setting.

Ratched lever operation:

to unlock catch pull lever, it will then swivel freely. To adjust bolt, release lever to engage catch,

loosen/tighten bold as required.

Pull, then

swivels freely

7 Additional Safety Rules

1. Disconnect from power when changing blades or servicing machine.

2. Before switching machine on be sure that all guards are in place and securely locked.

3. Do not use cracked or bent saw blades.

4. Replace table inserts (24/79) if slot has enlarged.

5. For cutting operations with tilted table the rip fence must be placed to the rigt of the blade.

6. When cutting round stock use a suitable jig to prevent work from turning.

7. When cutting boards in an upright position use a suitable push block to prevent kickback.

Jig for cutting

round stock

Push block

6.6 Setting of Saw Table

For bevel cuts the saw table can be steplessly tilted up to 45°. To tilt, loosen the wing nut (135) beneath the trunnion.

Tilt table to desired position, then retighten wing nut.

Fit wide slot table insert (79) to table, so blade can travel freely.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BAS 450 in the language / languages: English, German, Dutch, French, Swedish, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo BAS 450 Manual

Product: