719131
9
Zoom out
Zoom in
Previous page
1/12
Next page
Maintenance
After use, pull out the plug to prevent accidents.
When cleaning the washing
machine, use a soft cloth; this
will prevent scratching of the
cabinet surface.
Do not put the washing
machine outdoors or in damp
areas, such as bathroom.
Do not put heavy objects on
top of the washing machine.
Do not place the washing
machine near to heat-
generating items such as gas
cookers.
1. Spin cap
2. Spin tub
3. Spin cover
4. Water inlet
5. Control panel
6. Pulsator
7. Wash cover
8. Cabinet
9. Bottom
10. Wash timer switch
11. Wash & drain selector switch
12. Spin timer switch
13. Drain hose
14. Power wire
15. Back cover
Washing Instructions
Preparation
1. The machine should be placed on a  at ground.
2. The plug seat should have safety ground connection.
3. Lay down the over ow hose.
4. Use the water inlet hose to connect the water tap on the water inlet.
5. Adjust the water level based on the type of clothing material and its weight.
6. Turn on the power.
Washing
1. Set the “wash & drain selector switch” according to the material type and weight of clothes.
2. Set the “wash & drain selector switch” to the wash position.
3. Set the “wash timer” and place the clothes into the tub, adjust the water level to the proper position and put in the proper amount
of detergent into the wash tub.
4. Set the “wash timer”; washing machine will start washing.
5. After wash, set the “wash & drain selector switch” to the drain position to the start draining off the water.
Spinning
1. After spinning, set the water inlet hose to the water inlet of the spin tub position for 20-30 seconds.
2. According to the “spin timer” process, spinning the clothes for 1 min-5 min, repeat once or twice.
Rinsing
1. After spinning, the spin tub will stop. Open the spin cover and transfer the clothes from the spin tub to the wash tub to prepare
for rinsing.
2. Repeat the washing process but do not add any detergent.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MW-120, applies all basic requirements and other relevant regulations listed in the
European directive for electromagnetic compatibility (2004/108/EC) and low voltage directive (2014/35/EU).
If you require a full declaration of conformity, you can contact the adress listed on the backside of this manual.
1
3
2
8
9
14
15
13
6
4
7
12
10
11
5
ENGLISH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mestic MW-120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mestic MW-120 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info